BGears b-PWM 140 Red case fan 140mm 2000 RPM 110 CFM 2 Ball
- 1 Fan
- No Controller
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
BGears
A 140mm case fan with 15 blades and two-ball bearings delivers 110 CFM airflow at up to 2000 RPM and 35.8 dBA noise
The BGears b-PWM 140 Black is a 140 mm case fan built around a two-ball bearing for extended service life. It spins between 500 and 1800 RPM, pushing up to 110 CFM at a stated 35.8 dBA. A 4-pin PWM connector enables motherboard speed control, while a bundled 3-to-4-pin Molex adapter allows direct power-supply connection. Fifteen aerodynamic blades are designed to maintain airflow pressure through restrictive grilles or radiators.
This fan suits builders who need strong airflow for CPU coolers, radiators or high-heat chassis and who prefer mechanical bearing durability over fluid-dynamic quietness. PWM control lets the system reduce speed at idle, yet the minimum 500 RPM still produces audible airflow. Buyers targeting near-silent operation or who want addressable lighting will not find those features here. The single-fan pack also means multi-fan arrays require separate purchases.
The 1800 RPM ceiling determines the 110 CFM peak airflow and the 35.8 dBA noise rating quoted by the manufacturer. At this speed the two-ball bearing delivers its highest cooling capacity, making the figure the primary check for thermal-headroom planning. If a build requires lower maximum noise or a different airflow target, the fixed 1800 RPM limit becomes the deciding constraint.
| Brand | Bgears |
|---|---|
| Model | b-PWM 140 Black |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | 2 Ball |
| RPM | 2000 RPM |
| Air Flow | 110 CFM |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No |
| Greutate la expediere | 0.21 kg |
| Dimensiunile coletului | 216 × 157 × 36 mm |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
The fan ships with a mini 4-pin connector for PWM control and a 3-to-4-pin Molex adapter for direct PSU power; either connection works.
At 25 mm thick it exceeds the 15 mm slim profile, so verify your chassis has standard 140 mm clearance before installing.
Check the RPM reading in BIOS or fan-control software while the PWM duty cycle is at maximum; the reported speed should approach 1800 RPM.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?