NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Brute Networks
8GB registered ECC DDR4 module running at 2933 MHz with 1.20 V operation for compatible HP servers
This module is an 8 GB DDR4-2933 Registered ECC DIMM built for HP servers. It uses major-brand DRAM chips and runs at 1.2 V. The part matches HP part number 5YZ56AT and is validated for 100 % compatibility with supported platforms.
The single specification that determines fit is the Registered 1Rx8 organisation running at PC4-23400. Unbuffered or differently ranked modules will not work in the same slots. Verify that your server requires Registered ECC memory with this exact rank and speed before ordering.
Installation follows the usual 288-pin DIMM procedure: align the key notch, press firmly until the latches click, and confirm seating. The most common issue is mixing modules of different rank or voltage, so the supplier ships identically matched sticks to prevent mismatched sets.
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
The module runs at 2933 MT/s when the server memory controller and BIOS are configured for that data rate. Actual throughput depends on the platform's supported speeds and the number of populated channels.
PC4-23400 identifies DDR4-2933 standard signalling at 1.2 V. The peak transfer rate is capped by the server's memory controller and the number of active channels.
It requires a standard 288-pin DDR4 RDIMM socket. The registered design adds a buffer chip, so the module fits only in server boards wired for registered memory.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?