We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks 8GB DDR4-2933 1Rx8 Registered ECC server RAM

SKU CH-NXQV-MF93S

8GB registered ECC DDR4 module running at 2933 MHz with 1.20 V operation for compatible HP servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity supports larger server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rates
  • Registered ECC design protects data integrity
  • 2V operation reduces power consumption
  • 100% HP compatible with 5YZ56AT part number

HP-compatible 8 GB DDR4-2933 Registered ECC

This module is an 8 GB DDR4-2933 Registered ECC DIMM built for HP servers. It uses major-brand DRAM chips and runs at 1.2 V. The part matches HP part number 5YZ56AT and is validated for 100 % compatibility with supported platforms.

Registered 1Rx8 organisation at PC4-23400

The single specification that determines fit is the Registered 1Rx8 organisation running at PC4-23400. Unbuffered or differently ranked modules will not work in the same slots. Verify that your server requires Registered ECC memory with this exact rank and speed before ordering.

Standard 288-pin installation with matching sets

Installation follows the usual 288-pin DIMM procedure: align the key notch, press firmly until the latches click, and confirm seating. The most common issue is mixing modules of different rank or voltage, so the supplier ships identically matched sticks to prevent mismatched sets.

Highlights

  • 8GB capacity supports larger server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rates
  • Registered ECC design protects data integrity
  • 2V operation reduces power consumption
  • 100% HP compatible with 5YZ56AT part number

Specifications

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Questions about this item

What does the 2933 MHz speed mean once the module is installed in a server?

The module runs at 2933 MT/s when the server memory controller and BIOS are configured for that data rate. Actual throughput depends on the platform's supported speeds and the number of populated channels.

What does the PC4-23400 designation tell me about the interface and its practical limit?

PC4-23400 identifies DDR4-2933 standard signalling at 1.2 V. The peak transfer rate is capped by the server's memory controller and the number of active channels.

What physical slot and clearance does this 288-pin registered DIMM need?

It requires a standard 288-pin DDR4 RDIMM socket. The registered design adds a buffer chip, so the module fits only in server boards wired for registered memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.