Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Blue 7.75 inch rigid LED strip with low-profile modules and micro-connectors

Darkside

DarkSide DS-0624 7.75" Connect G2 Dimmable Rigid LED Strip Blue

SKU CH-WW8E-R5G0B

A dimmable rigid LED strip for PC custom lighting with a wider beam and lower power draw

  • ColorBlue
  • FeaturesNew Connect G2 version, now with wider beam, more light and
  • Wider 33% beam spreads light across larger area
  • 4× brighter surface with lower power draw
  • Japanese IC modules cut LED height by 33%
  • Modular Connect system lets you choose power cables
  • Rigid 7.75" strip installs straight without bending

Rigid LED Strip 7.75" Blue

The DarkSide DS-0624 is a 7.75-inch rigid LED strip that emits blue light for PC case illumination. It uses Japanese-made IC modules in a Connect G2 design that lowers the LED height by 33 percent to 2 mm. The strip is built for enthusiasts who want a slim, modular lighting element in a custom loop or air-cooled build.

Upgrade from previous IC module

The G2 module cuts LED height by 33 percent compared to the earlier version while widening the beam by 33 percent and increasing the light-emitting surface 2.4 times. Power draw is lower than before. The jump is worth it when a thinner profile, broader spread and brighter output matter more than staying with the taller, narrower first-generation strips.

Modular Connect system integration

The strip uses DarkSide Connect micro-connectors so you choose the exact power cables your layout needs. Cables are sold separately, letting you swap connector types without replacing the strip. The rigid form factor means the strip must be mounted flat; do not bend or short it to avoid permanent damage.

Privalumai

  • Wider 33% beam spreads light across larger area
  • 4× brighter surface with lower power draw
  • Japanese IC modules cut LED height by 33%
  • Modular Connect system lets you choose power cables
  • Rigid 7.75" strip installs straight without bending

Specifikacijos

BrandDarkside
ModelDS-0624
Part NumberDS-0624
ColorBlue
FeaturesNew Connect G2 version, now with wider beam, more light and less power draw!

Klausimai apie šią prekę

What length clearance does the 7.75" rigid strip need inside a case?

The strip is 7.75" long and 2 mm tall, so allow at least that length and a few millimetres of vertical space; do not bend the rigid board.

How do I connect the DarkSide Connect micro-connector without damaging the strip?

Plug the modular CONNECT power cable straight into the micro-connector; forcing it sideways or shorting the pins will cause permanent damage.

When should I replace the modular CONNECT power cable?

Replace the cable if the connector feels loose, shows bent pins, or the strip flickers, because the cable is the only replaceable link in the chain.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.