We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 7.75 inch rigid LED strip with low-profile modules and micro-connectors

Darkside

DarkSide DS-0624 7.75" Connect G2 Dimmable Rigid LED Strip Blue

SKU CH-WW8E-R5G0B

A dimmable rigid LED strip for PC custom lighting with a wider beam and lower power draw

  • ColorBlue
  • FeaturesNew Connect G2 version, now with wider beam, more light and
  • Wider 33% beam spreads light across larger area
  • 4× brighter surface with lower power draw
  • Japanese IC modules cut LED height by 33%
  • Modular Connect system lets you choose power cables
  • Rigid 7.75" strip installs straight without bending

Rigid LED Strip 7.75" Blue

The DarkSide DS-0624 is a 7.75-inch rigid LED strip that emits blue light for PC case illumination. It uses Japanese-made IC modules in a Connect G2 design that lowers the LED height by 33 percent to 2 mm. The strip is built for enthusiasts who want a slim, modular lighting element in a custom loop or air-cooled build.

Upgrade from previous IC module

The G2 module cuts LED height by 33 percent compared to the earlier version while widening the beam by 33 percent and increasing the light-emitting surface 2.4 times. Power draw is lower than before. The jump is worth it when a thinner profile, broader spread and brighter output matter more than staying with the taller, narrower first-generation strips.

Modular Connect system integration

The strip uses DarkSide Connect micro-connectors so you choose the exact power cables your layout needs. Cables are sold separately, letting you swap connector types without replacing the strip. The rigid form factor means the strip must be mounted flat; do not bend or short it to avoid permanent damage.

Highlights

  • Wider 33% beam spreads light across larger area
  • 4× brighter surface with lower power draw
  • Japanese IC modules cut LED height by 33%
  • Modular Connect system lets you choose power cables
  • Rigid 7.75" strip installs straight without bending

Specifications

BrandDarkside
ModelDS-0624
Part NumberDS-0624
ColorBlue
FeaturesNew Connect G2 version, now with wider beam, more light and less power draw!

Questions about this item

What length clearance does the 7.75" rigid strip need inside a case?

The strip is 7.75" long and 2 mm tall, so allow at least that length and a few millimetres of vertical space; do not bend the rigid board.

How do I connect the DarkSide Connect micro-connector without damaging the strip?

Plug the modular CONNECT power cable straight into the micro-connector; forcing it sideways or shorting the pins will cause permanent damage.

When should I replace the modular CONNECT power cable?

Replace the cable if the connector feels loose, shows bent pins, or the strip flickers, because the cable is the only replaceable link in the chain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.