Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Blue 7.75 inch rigid LED strip with low-profile modules and micro-connectors

Darkside

DarkSide DS-0624 7.75" Connect G2 Dimmable Rigid LED Strip Blue

SKU CH-WW8E-R5G0B

A dimmable rigid LED strip for PC custom lighting with a wider beam and lower power draw

  • ColorBlue
  • FeaturesNew Connect G2 version, now with wider beam, more light and
  • Wider 33% beam spreads light across larger area
  • 4× brighter surface with lower power draw
  • Japanese IC modules cut LED height by 33%
  • Modular Connect system lets you choose power cables
  • Rigid 7.75" strip installs straight without bending

Rigid LED Strip 7.75" Blue

The DarkSide DS-0624 is a 7.75-inch rigid LED strip that emits blue light for PC case illumination. It uses Japanese-made IC modules in a Connect G2 design that lowers the LED height by 33 percent to 2 mm. The strip is built for enthusiasts who want a slim, modular lighting element in a custom loop or air-cooled build.

Upgrade from previous IC module

The G2 module cuts LED height by 33 percent compared to the earlier version while widening the beam by 33 percent and increasing the light-emitting surface 2.4 times. Power draw is lower than before. The jump is worth it when a thinner profile, broader spread and brighter output matter more than staying with the taller, narrower first-generation strips.

Modular Connect system integration

The strip uses DarkSide Connect micro-connectors so you choose the exact power cables your layout needs. Cables are sold separately, letting you swap connector types without replacing the strip. The rigid form factor means the strip must be mounted flat; do not bend or short it to avoid permanent damage.

Přednosti

  • Wider 33% beam spreads light across larger area
  • 4× brighter surface with lower power draw
  • Japanese IC modules cut LED height by 33%
  • Modular Connect system lets you choose power cables
  • Rigid 7.75" strip installs straight without bending

Specifikace

BrandDarkside
ModelDS-0624
Part NumberDS-0624
ColorBlue
FeaturesNew Connect G2 version, now with wider beam, more light and less power draw!

Otázky k tomuto produktu

What length clearance does the 7.75" rigid strip need inside a case?

The strip is 7.75" long and 2 mm tall, so allow at least that length and a few millimetres of vertical space; do not bend the rigid board.

How do I connect the DarkSide Connect micro-connector without damaging the strip?

Plug the modular CONNECT power cable straight into the micro-connector; forcing it sideways or shorting the pins will cause permanent damage.

When should I replace the modular CONNECT power cable?

Replace the cable if the connector feels loose, shows bent pins, or the strip flickers, because the cable is the only replaceable link in the chain.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.