Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
3.5 inch SAS hard drive with 13 Gen tray, silver metal finish

DELL

DELL 400-ANVN 10TB 7.2K SAS 3.5" 12Gb/s internal hard drive

SKU CH-H9GJ-AFZ3E MPN 400-ANVN

A 10 TB, 7200 RPM SAS hard drive in a 3.5-inch form factor with a 12 Gb/s interface, supplied with a 13 Gen tray

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Capacity and interface

The Dell 400-ANVN is a 10TB 3.5-inch internal hard drive with a SAS 12Gb/s interface. It is built for desktop workstations and servers that need large-capacity bulk storage on a high-throughput serial bus.

Thermals and power

The 7200 RPM spindle speed produces typical mechanical-drive heat and acoustic output for a 3.5-inch form factor. Power draw scales with the 12Gb/s SAS link and sustained sequential workloads.

Upgrade context

This drive replaces smaller-capacity SAS or SATA 3.5-inch drives when a single 10TB volume simplifies array management. The jump is worthwhile when the 13-generation tray matches the target chassis and the SAS controller supports 12Gb/s speeds.

Privalumai

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I install the 13 Gen tray that ships with the 400-ANVN into a 3.5" SAS bay?

Slide the tray into the bay until the latch clicks, then secure the single retention screw; the tray keying prevents upside-down insertion, which is the step most often missed.

What maintenance or replacement will the 10TB 7200 RPM SAS drive need later?

No scheduled maintenance is required; replace the drive if SMART reports reallocated sectors or if the bearing noise increases beyond normal 7200 RPM levels.

What limit appears first on the 400-ANVN during sustained 12Gb/s SAS writes?

The 7200 RPM platters reach their maximum sustained transfer rate before the 12Gb/s SAS interface saturates, so mechanical throughput is the first bottleneck.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.