Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
3.5 inch SAS hard drive with 13 Gen tray, silver metal finish

DELL

DELL 400-ANVN 10TB 7.2K SAS 3.5" 12Gb/s internal hard drive

SKU CH-H9GJ-AFZ3E MPN 400-ANVN

A 10 TB, 7200 RPM SAS hard drive in a 3.5-inch form factor with a 12 Gb/s interface, supplied with a 13 Gen tray

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Capacity and interface

The Dell 400-ANVN is a 10TB 3.5-inch internal hard drive with a SAS 12Gb/s interface. It is built for desktop workstations and servers that need large-capacity bulk storage on a high-throughput serial bus.

Thermals and power

The 7200 RPM spindle speed produces typical mechanical-drive heat and acoustic output for a 3.5-inch form factor. Power draw scales with the 12Gb/s SAS link and sustained sequential workloads.

Upgrade context

This drive replaces smaller-capacity SAS or SATA 3.5-inch drives when a single 10TB volume simplifies array management. The jump is worthwhile when the 13-generation tray matches the target chassis and the SAS controller supports 12Gb/s speeds.

Helstu kostir

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How do I install the 13 Gen tray that ships with the 400-ANVN into a 3.5" SAS bay?

Slide the tray into the bay until the latch clicks, then secure the single retention screw; the tray keying prevents upside-down insertion, which is the step most often missed.

What maintenance or replacement will the 10TB 7200 RPM SAS drive need later?

No scheduled maintenance is required; replace the drive if SMART reports reallocated sectors or if the bearing noise increases beyond normal 7200 RPM levels.

What limit appears first on the 400-ANVN during sustained 12Gb/s SAS writes?

The 7200 RPM platters reach their maximum sustained transfer rate before the 12Gb/s SAS interface saturates, so mechanical throughput is the first bottleneck.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.