Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
3.5 inch SAS hard drive with 13 Gen tray, silver metal finish

DELL

DELL 400-ANVN 10TB 7.2K SAS 3.5" 12Gb/s internal hard drive

SKU CH-H9GJ-AFZ3E MPN 400-ANVN

A 10 TB, 7200 RPM SAS hard drive in a 3.5-inch form factor with a 12 Gb/s interface, supplied with a 13 Gen tray

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Capacity and interface

The Dell 400-ANVN is a 10TB 3.5-inch internal hard drive with a SAS 12Gb/s interface. It is built for desktop workstations and servers that need large-capacity bulk storage on a high-throughput serial bus.

Thermals and power

The 7200 RPM spindle speed produces typical mechanical-drive heat and acoustic output for a 3.5-inch form factor. Power draw scales with the 12Gb/s SAS link and sustained sequential workloads.

Upgrade context

This drive replaces smaller-capacity SAS or SATA 3.5-inch drives when a single 10TB volume simplifies array management. The jump is worthwhile when the 13-generation tray matches the target chassis and the SAS controller supports 12Gb/s speeds.

Poudarki

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I install the 13 Gen tray that ships with the 400-ANVN into a 3.5" SAS bay?

Slide the tray into the bay until the latch clicks, then secure the single retention screw; the tray keying prevents upside-down insertion, which is the step most often missed.

What maintenance or replacement will the 10TB 7200 RPM SAS drive need later?

No scheduled maintenance is required; replace the drive if SMART reports reallocated sectors or if the bearing noise increases beyond normal 7200 RPM levels.

What limit appears first on the 400-ANVN during sustained 12Gb/s SAS writes?

The 7200 RPM platters reach their maximum sustained transfer rate before the 12Gb/s SAS interface saturates, so mechanical throughput is the first bottleneck.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.