Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
3.5 inch SAS hard drive with 13 Gen tray, silver metal finish

DELL

DELL 400-ANVN 10TB 7.2K SAS 3.5" 12Gb/s internal hard drive

SKU CH-H9GJ-AFZ3E MPN 400-ANVN

A 10 TB, 7200 RPM SAS hard drive in a 3.5-inch form factor with a 12 Gb/s interface, supplied with a 13 Gen tray

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Capacity and interface

The Dell 400-ANVN is a 10TB 3.5-inch internal hard drive with a SAS 12Gb/s interface. It is built for desktop workstations and servers that need large-capacity bulk storage on a high-throughput serial bus.

Thermals and power

The 7200 RPM spindle speed produces typical mechanical-drive heat and acoustic output for a 3.5-inch form factor. Power draw scales with the 12Gb/s SAS link and sustained sequential workloads.

Upgrade context

This drive replaces smaller-capacity SAS or SATA 3.5-inch drives when a single 10TB volume simplifies array management. The jump is worthwhile when the 13-generation tray matches the target chassis and the SAS controller supports 12Gb/s speeds.

Ciri-ciri utama

  • 10 TB capacity for large-scale data storage
  • 12 Gb/s SAS interface for fast data transfer
  • 7200 RPM spindle speed for responsive performance
  • 5-inch form factor fits standard drive bays
  • Includes 13th generation tray for direct installation

Spesifikasi

Belum ada spesifikasi diterbitkan untuk produk ini.

Soalan tentang produk ini

How do I install the 13 Gen tray that ships with the 400-ANVN into a 3.5" SAS bay?

Slide the tray into the bay until the latch clicks, then secure the single retention screw; the tray keying prevents upside-down insertion, which is the step most often missed.

What maintenance or replacement will the 10TB 7200 RPM SAS drive need later?

No scheduled maintenance is required; replace the drive if SMART reports reallocated sectors or if the bearing noise increases beyond normal 7200 RPM levels.

What limit appears first on the 400-ANVN during sustained 12Gb/s SAS writes?

The 7200 RPM platters reach their maximum sustained transfer rate before the 12Gb/s SAS interface saturates, so mechanical throughput is the first bottleneck.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.