Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green 3D printing filament spool 2.85mm 750g

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Cricket Green16 3d printers accessory

SKU CH-TEZB-JZJM9

PETG-based filament offering ABS-like toughness with low warp and strong layer adhesion in 2.85 mm diameter on a 750 g spool

  • ColorGreen
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • Strong layer adhesion creates parts nearly as strong between layers
  • Low contraction minimises warping for accurate overhangs and bridges
  • Prints cleanly without unpleasant fumes or odours

E3D spoolWorks EDGE Filament 2.85mm 750g

This PETG-based filament combines ABS-like toughness with PLA ease of use for reliable 3D printing. It suits makers who need strong, accurate parts without warp or fumes. The Cricket Green16 colour adds a distinctive finish to functional prints.

Recyclable low-contraction material prints cleanly

Edge offers super-low contraction to minimise warping on large models. It adheres to beds with a touch of gluestick and pairs with Scaffold support material for clean breakaway. No unpleasant odours are released during printing.

Check your printer accepts 2.85mm filament

Verify the extruder and hotend are compatible with 2.85mm diameter before ordering. The 750g spool weight requires a holder that accommodates this size. Ensure your slicer profile matches PETG-based material settings for best results.

Privalumai

  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • Strong layer adhesion creates parts nearly as strong between layers
  • Low contraction minimises warping for accurate overhangs and bridges
  • Prints cleanly without unpleasant fumes or odours

Specifikacijos

BrandE3D
ModelEdge
ColorGreen
TypeFilament

Klausimai apie šią prekę

What is the filament diameter and spool weight for the 2.85mm EDGE Cricket Green16?

This spool contains 750g of filament with a 2.85mm diameter, suitable for printers calibrated for that size.

What bed preparation does EDGE filament require for proper adhesion?

The manufacturer notes it adheres effectively to bed surfaces with just a little bit of gluestick applied before printing.

Which support material is recommended for clean breakaway with this filament?

It pairs with Scaffold support material for reliable adhesion and clean breakaway during dual-extrusion prints.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.