Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 3D printing filament spool 2.85mm 750g

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Cricket Green16 3d printers accessory

SKU CH-TEZB-JZJM9

PETG-based filament offering ABS-like toughness with low warp and strong layer adhesion in 2.85 mm diameter on a 750 g spool

  • ColorGreen
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • Strong layer adhesion creates parts nearly as strong between layers
  • Low contraction minimises warping for accurate overhangs and bridges
  • Prints cleanly without unpleasant fumes or odours

E3D spoolWorks EDGE Filament 2.85mm 750g

This PETG-based filament combines ABS-like toughness with PLA ease of use for reliable 3D printing. It suits makers who need strong, accurate parts without warp or fumes. The Cricket Green16 colour adds a distinctive finish to functional prints.

Recyclable low-contraction material prints cleanly

Edge offers super-low contraction to minimise warping on large models. It adheres to beds with a touch of gluestick and pairs with Scaffold support material for clean breakaway. No unpleasant odours are released during printing.

Check your printer accepts 2.85mm filament

Verify the extruder and hotend are compatible with 2.85mm diameter before ordering. The 750g spool weight requires a holder that accommodates this size. Ensure your slicer profile matches PETG-based material settings for best results.

Kohokohdat

  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • Strong layer adhesion creates parts nearly as strong between layers
  • Low contraction minimises warping for accurate overhangs and bridges
  • Prints cleanly without unpleasant fumes or odours

Tekniset tiedot

BrandE3D
ModelEdge
ColorGreen
TypeFilament

Kysymyksiä tästä tuotteesta

What is the filament diameter and spool weight for the 2.85mm EDGE Cricket Green16?

This spool contains 750g of filament with a 2.85mm diameter, suitable for printers calibrated for that size.

What bed preparation does EDGE filament require for proper adhesion?

The manufacturer notes it adheres effectively to bed surfaces with just a little bit of gluestick applied before printing.

Which support material is recommended for clean breakaway with this filament?

It pairs with Scaffold support material for reliable adhesion and clean breakaway during dual-extrusion prints.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.