暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 3D printing filament spool 2.85mm 750g

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g Cricket Green16 3d printers accessory

SKU CH-TEZB-JZJM9

PETG-based filament offering ABS-like toughness with low warp and strong layer adhesion in 2.85 mm diameter on a 750 g spool

  • ColorGreen
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • Strong layer adhesion creates parts nearly as strong between layers
  • Low contraction minimises warping for accurate overhangs and bridges
  • Prints cleanly without unpleasant fumes or odours

E3D spoolWorks EDGE Filament 2.85mm 750g

This PETG-based filament combines ABS-like toughness with PLA ease of use for reliable 3D printing. It suits makers who need strong, accurate parts without warp or fumes. The Cricket Green16 colour adds a distinctive finish to functional prints.

Recyclable low-contraction material prints cleanly

Edge offers super-low contraction to minimise warping on large models. It adheres to beds with a touch of gluestick and pairs with Scaffold support material for clean breakaway. No unpleasant odours are released during printing.

Check your printer accepts 2.85mm filament

Verify the extruder and hotend are compatible with 2.85mm diameter before ordering. The 750g spool weight requires a holder that accommodates this size. Ensure your slicer profile matches PETG-based material settings for best results.

特長

  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • Strong layer adhesion creates parts nearly as strong between layers
  • Low contraction minimises warping for accurate overhangs and bridges
  • Prints cleanly without unpleasant fumes or odours

仕様

BrandE3D
ModelEdge
ColorGreen
TypeFilament

この商品に関する質問

What is the filament diameter and spool weight for the 2.85mm EDGE Cricket Green16?

This spool contains 750g of filament with a 2.85mm diameter, suitable for printers calibrated for that size.

What bed preparation does EDGE filament require for proper adhesion?

The manufacturer notes it adheres effectively to bed surfaces with just a little bit of gluestick applied before printing.

Which support material is recommended for clean breakaway with this filament?

It pairs with Scaffold support material for reliable adhesion and clean breakaway during dual-extrusion prints.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。