NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Goldshell
Scrypt ASIC miner delivering 3.4 Gh/s at 1800 W with built-in power supply and 529 J/Gh efficiency for Litecoin and Dogecoin
The Goldshell E-DG1M is a Scrypt algorithm ASIC miner delivering a hashrate of 3.4Gh/s with a power draw of 1800W. It targets Litecoin, Dogecoin and Bells mining in a compact integrated chassis that includes the power supply. The unit measures 443 by 360 by 135mm and weighs 16kg, making it suitable for home or small-farm deployment.
Verify that your electrical circuit can supply 110 to 240VAC through a 16A rated cable to match the included PSU requirements. Ensure the operating space stays within 0 to 35 degrees Celsius and relative humidity does not exceed 65 percent. Confirm you have a stable network connection for the dual-mode port and Wi-Fi link before powering the unit on.
The miner runs at a typical 1800W with an efficiency of 529J/Gh while its internal fans spin at 3600rpm to maintain temperature. Acoustic output is rated at 45dB under standard load, which is comparable to a quiet office environment. Power consumption stays within a five percent tolerance of the rated figure during steady-state hashing.
| Brand | goldshell |
|---|---|
| Series | ECHO Series |
| Model | E-DG1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin, Litecoin |
| Mining Hardware | ASIC |
| Hashrate | 3.4Gh/s |
| Power Supply | Included |
| Power Consumption | 1800W |
| Power Efficiency | 529J/Gh |
The unit has an integrated design with a built-in power supply included, so no separate PSU purchase is required.
The E-DG1M is specified at 3.4Gh/s with a ±5% tolerance; no other hashrate versions of this model are listed.
At the default 3.4Gh/s the miner draws about 1800W, giving the stated 529J/Gh efficiency under typical operating conditions.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?