NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Goldshell
Scrypt ASIC miner delivering 3.4 Gh/s at 1800 W with built-in power supply and 529 J/Gh efficiency for Litecoin and Dogecoin
The Goldshell E-DG1M is a Scrypt algorithm ASIC miner delivering a hashrate of 3.4Gh/s with a power draw of 1800W. It targets Litecoin, Dogecoin and Bells mining in a compact integrated chassis that includes the power supply. The unit measures 443 by 360 by 135mm and weighs 16kg, making it suitable for home or small-farm deployment.
Verify that your electrical circuit can supply 110 to 240VAC through a 16A rated cable to match the included PSU requirements. Ensure the operating space stays within 0 to 35 degrees Celsius and relative humidity does not exceed 65 percent. Confirm you have a stable network connection for the dual-mode port and Wi-Fi link before powering the unit on.
The miner runs at a typical 1800W with an efficiency of 529J/Gh while its internal fans spin at 3600rpm to maintain temperature. Acoustic output is rated at 45dB under standard load, which is comparable to a quiet office environment. Power consumption stays within a five percent tolerance of the rated figure during steady-state hashing.
| Brand | goldshell |
|---|---|
| Series | ECHO Series |
| Model | E-DG1M |
| Type | Mining Machine/Miner |
| Crypto Algorithm | Scrypt |
| Compatible Currency | Dogecoin, Litecoin |
| Mining Hardware | ASIC |
| Hashrate | 3.4Gh/s |
| Power Supply | Included |
| Power Consumption | 1800W |
| Power Efficiency | 529J/Gh |
The unit has an integrated design with a built-in power supply included, so no separate PSU purchase is required.
The E-DG1M is specified at 3.4Gh/s with a ±5% tolerance; no other hashrate versions of this model are listed.
At the default 3.4Gh/s the miner draws about 1800W, giving the stated 529J/Gh efficiency under typical operating conditions.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?