Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular PCIe add-in card with gold edge connector and silver heatsink cover

HPE

HPE 763836-B21 1.60 TB internal solid state drive PCI Express 2.0 x8

SKU CH-K7XS-NMT9Y

1.60 TB PCIe 2.0 x8 solid-state drive for servers, delivering 2662.40 MB/s reads and 1024 MB/s writes with 0.5 DWPD endurance

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

HPE 763836-B21 1.60 TB PCIe Accelerator

This HPE Value Endurance drive adds 1.60 TB of flash storage through a PCI Express 2.0 x8 slot. It is built for ProLiant DL rack servers such as the DL160p Gen8 and DL180 G6 where low-latency access to active data sets matters.

Suits read-heavy workloads in supported ProLiant

The 0.5 DWPD endurance rating fits caching, boot and logging duties where writes stay moderate. Builds that need higher write endurance, a different form factor or servers outside the listed DL models should choose another device.

0.5 DWPD endurance rating

At 0.5 drive writes per day the drive sustains 1024 MB/s sequential write and 62000 random 4 KB write IOPS. That single figure tells you whether the endurance envelope matches your workload.

Privalumai

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

Specifikacijos

BrandHPE

Klausimai apie šią prekę

How much power does the 1.60 TB PCIe 2.0 x8 drive draw under sustained load?

The card is rated at 21 W typical for the Value Endurance workload profile.

What server slot and platform are required to install this half-height PCIe add-in card?

It needs a free PCI Express 2.0 x8 slot in a supported ProLiant DL rack server such as the DL160p Gen8 or DL180 G6.

Will the 1.60 TB accelerator work in a DL180 G6 that currently runs mechanical drives?

Yes, the drive is validated for the DL180 G6 and will operate alongside existing storage without interface conflicts.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.