אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

HPE

HPE 763836-B21 1.60 TB internal solid state drive PCI Express 2.0 x8

SKU CH-K7XS-NMT9Y

1.60 TB PCIe 2.0 x8 solid-state drive for servers, delivering 2662.40 MB/s reads and 1024 MB/s writes with 0.5 DWPD endurance

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

HPE 763836-B21 1.60 TB PCIe Accelerator

This HPE Value Endurance drive adds 1.60 TB of flash storage through a PCI Express 2.0 x8 slot. It is built for ProLiant DL rack servers such as the DL160p Gen8 and DL180 G6 where low-latency access to active data sets matters.

Suits read-heavy workloads in supported ProLiant

The 0.5 DWPD endurance rating fits caching, boot and logging duties where writes stay moderate. Builds that need higher write endurance, a different form factor or servers outside the listed DL models should choose another device.

0.5 DWPD endurance rating

At 0.5 drive writes per day the drive sustains 1024 MB/s sequential write and 62000 random 4 KB write IOPS. That single figure tells you whether the endurance envelope matches your workload.

נקודות עיקריות

  • 60 TB capacity stores large datasets
  • PCI Express 2.0 x8 interface enables high-speed data transfer
  • 40 MB/s maximum read rate accelerates data access
  • 68000 IOPS random 4KB read handles heavy workloads
  • 5 DWPD endurance rating supports write-intensive applications

מפרט טכני

BrandHPE

שאלות על הפריט הזה

How much power does the 1.60 TB PCIe 2.0 x8 drive draw under sustained load?

The card is rated at 21 W typical for the Value Endurance workload profile.

What server slot and platform are required to install this half-height PCIe add-in card?

It needs a free PCI Express 2.0 x8 slot in a supported ProLiant DL rack server such as the DL160p Gen8 or DL180 G6.

Will the 1.60 TB accelerator work in a DL180 G6 that currently runs mechanical drives?

Yes, the drive is validated for the DL180 G6 and will operate alongside existing storage without interface conflicts.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.