Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
A green printed circuit board with a horizontal PCIe x16 slot and edge connector

iStarUSA Inc.

iStarUSA Inc. DD-666-2U-M 2U PCIe x16 Riser Card Middle Position

SKU CH-PN5H-4XG4K MPN DD-666-2U-M

A 2U PCIe x16 riser card that places the slot in the middle position for motherboard slot six

  • TypeRiser Card Middle Position
  • Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position MB Slot P
  • Fits 2U rack height for dense server builds
  • PCIe x16 to x16 riser keeps full bandwidth
  • Middle-position design aligns with motherboard slot 6
  • Note: too tall for D Storm 2U chassis, needs modification
  • Model DD-666-2U-M listed by manufacturer June 21, 2013

2U PCIe x16 Riser for Middle Slot

The iStarUSA DD-666-2U-M is a PCIe x16 to x16 riser card built for a 2U rackmount chassis. It places an expansion card in the middle motherboard slot position, numbered 6. This component suits system integrators assembling dense servers or workstations where horizontal card clearance is required.

Replaces standard vertical mounting in 2U builds

Use this riser when a full-height add-in card cannot fit vertically in a 2U enclosure. The jump is worth it when the chassis depth allows a horizontal layout and the motherboard slot layout matches position 6. It does not serve builds where the card must remain upright or where the slot position differs.

Limited by 2U height and fixed slot alignment

The PCIe x16 electrical interface runs through the riser without signal conversion, so bandwidth matches the host slot. Practical limits come from the 2U form factor: the assembly is noted as too tall for a D Storm 2U chassis and requires modification to fit. Builders must verify internal clearance and slot indexing before installation.

Privalumai

  • Fits 2U rack height for dense server builds
  • PCIe x16 to x16 riser keeps full bandwidth
  • Middle-position design aligns with motherboard slot 6
  • Note: too tall for D Storm 2U chassis, needs modification
  • Model DD-666-2U-M listed by manufacturer June 21, 2013

Specifikacijos

BrandiStarUSA
ModelDD-666-2U-M
TypeRiser Card Middle Position
Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position
MB Slot Position: 6
*Notes: too tall for D Storm 2U chassis. need modification
Siuntos svoris0.09 kg
Pakuotės dydis198 × 155 × 46 mm

Klausimai apie šią prekę

Will the 2U riser card fit in a standard 2U chassis without modification?

The middle-position riser is noted as too tall for the D Storm 2U chassis and requires modification; verify internal clearance before installing.

Which motherboard slot does the riser connect to and how is the card secured?

It plugs into motherboard slot position 6 using a PCIe x16 edge connector; secure the riser bracket to the chassis with screws to prevent signal loss from vibration.

What long-term upkeep does the PCIe x16 riser need?

No moving parts exist; periodically reseat the edge connector and blow dust from the gold fingers to maintain reliable contact.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.