暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A green printed circuit board with a horizontal PCIe x16 slot and edge connector

iStarUSA Inc.

iStarUSA Inc. DD-666-2U-M 2U PCIe x16 Riser Card Middle Position

SKU CH-PN5H-4XG4K MPN DD-666-2U-M

A 2U PCIe x16 riser card that places the slot in the middle position for motherboard slot six

  • TypeRiser Card Middle Position
  • Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position MB Slot P
  • Fits 2U rack height for dense server builds
  • PCIe x16 to x16 riser keeps full bandwidth
  • Middle-position design aligns with motherboard slot 6
  • Note: too tall for D Storm 2U chassis, needs modification
  • Model DD-666-2U-M listed by manufacturer June 21, 2013

2U PCIe x16 Riser for Middle Slot

The iStarUSA DD-666-2U-M is a PCIe x16 to x16 riser card built for a 2U rackmount chassis. It places an expansion card in the middle motherboard slot position, numbered 6. This component suits system integrators assembling dense servers or workstations where horizontal card clearance is required.

Replaces standard vertical mounting in 2U builds

Use this riser when a full-height add-in card cannot fit vertically in a 2U enclosure. The jump is worth it when the chassis depth allows a horizontal layout and the motherboard slot layout matches position 6. It does not serve builds where the card must remain upright or where the slot position differs.

Limited by 2U height and fixed slot alignment

The PCIe x16 electrical interface runs through the riser without signal conversion, so bandwidth matches the host slot. Practical limits come from the 2U form factor: the assembly is noted as too tall for a D Storm 2U chassis and requires modification to fit. Builders must verify internal clearance and slot indexing before installation.

特長

  • Fits 2U rack height for dense server builds
  • PCIe x16 to x16 riser keeps full bandwidth
  • Middle-position design aligns with motherboard slot 6
  • Note: too tall for D Storm 2U chassis, needs modification
  • Model DD-666-2U-M listed by manufacturer June 21, 2013

仕様

BrandiStarUSA
ModelDD-666-2U-M
TypeRiser Card Middle Position
Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position
MB Slot Position: 6
*Notes: too tall for D Storm 2U chassis. need modification
配送重量0.09 kg
梱包サイズ198 × 155 × 46 mm

この商品に関する質問

Will the 2U riser card fit in a standard 2U chassis without modification?

The middle-position riser is noted as too tall for the D Storm 2U chassis and requires modification; verify internal clearance before installing.

Which motherboard slot does the riser connect to and how is the card secured?

It plugs into motherboard slot position 6 using a PCIe x16 edge connector; secure the riser bracket to the chassis with screws to prevent signal loss from vibration.

What long-term upkeep does the PCIe x16 riser need?

No moving parts exist; periodically reseat the edge connector and blow dust from the gold fingers to maintain reliable contact.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。