iStarUSA Inc.
iStarUSA Inc. DD-666-2U-M 2U PCIe x16 Riser Card Middle Position
A 2U PCIe x16 riser card that places the slot in the middle position for motherboard slot six
- TypeRiser Card Middle Position
- Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position MB Slot P
- Fits 2U rack height for dense server builds
- PCIe x16 to x16 riser keeps full bandwidth
- Middle-position design aligns with motherboard slot 6
- Note: too tall for D Storm 2U chassis, needs modification
- Model DD-666-2U-M listed by manufacturer June 21, 2013
2U PCIe x16 Riser for Middle Slot
The iStarUSA DD-666-2U-M is a PCIe x16 to x16 riser card built for a 2U rackmount chassis. It places an expansion card in the middle motherboard slot position, numbered 6. This component suits system integrators assembling dense servers or workstations where horizontal card clearance is required.
Replaces standard vertical mounting in 2U builds
Use this riser when a full-height add-in card cannot fit vertically in a 2U enclosure. The jump is worth it when the chassis depth allows a horizontal layout and the motherboard slot layout matches position 6. It does not serve builds where the card must remain upright or where the slot position differs.
Limited by 2U height and fixed slot alignment
The PCIe x16 electrical interface runs through the riser without signal conversion, so bandwidth matches the host slot. Practical limits come from the 2U form factor: the assembly is noted as too tall for a D Storm 2U chassis and requires modification to fit. Builders must verify internal clearance and slot indexing before installation.
Акценти
- Fits 2U rack height for dense server builds
- PCIe x16 to x16 riser keeps full bandwidth
- Middle-position design aligns with motherboard slot 6
- Note: too tall for D Storm 2U chassis, needs modification
- Model DD-666-2U-M listed by manufacturer June 21, 2013
Спецификации
| Brand | iStarUSA |
|---|---|
| Model | DD-666-2U-M |
| Type | Riser Card Middle Position |
| Specifications | 2U PCIe x16 to PCIe x16 Riser Card Middle Position MB Slot Position: 6 *Notes: too tall for D Storm 2U chassis. need modification |
| Тегло на пратката | 0.09 kg |
| Размери на опаковката | 198 × 155 × 46 mm |
Въпроси за този артикул
Will the 2U riser card fit in a standard 2U chassis without modification?
The middle-position riser is noted as too tall for the D Storm 2U chassis and requires modification; verify internal clearance before installing.
Which motherboard slot does the riser connect to and how is the card secured?
It plugs into motherboard slot position 6 using a PCIe x16 edge connector; secure the riser bracket to the chassis with screws to prevent signal loss from vibration.
What long-term upkeep does the PCIe x16 riser need?
No moving parts exist; periodically reseat the edge connector and blow dust from the gold fingers to maintain reliable contact.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 щ.д.
0.00132964BTC
В наличност
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 щ.д.
0.00010119BTC
В наличност