저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
A green printed circuit board with a horizontal PCIe x16 slot and edge connector

iStarUSA Inc.

iStarUSA Inc. DD-666-2U-M 2U PCIe x16 Riser Card Middle Position

SKU CH-PN5H-4XG4K MPN DD-666-2U-M

A 2U PCIe x16 riser card that places the slot in the middle position for motherboard slot six

  • TypeRiser Card Middle Position
  • Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position MB Slot P
  • Fits 2U rack height for dense server builds
  • PCIe x16 to x16 riser keeps full bandwidth
  • Middle-position design aligns with motherboard slot 6
  • Note: too tall for D Storm 2U chassis, needs modification
  • Model DD-666-2U-M listed by manufacturer June 21, 2013

2U PCIe x16 Riser for Middle Slot

The iStarUSA DD-666-2U-M is a PCIe x16 to x16 riser card built for a 2U rackmount chassis. It places an expansion card in the middle motherboard slot position, numbered 6. This component suits system integrators assembling dense servers or workstations where horizontal card clearance is required.

Replaces standard vertical mounting in 2U builds

Use this riser when a full-height add-in card cannot fit vertically in a 2U enclosure. The jump is worth it when the chassis depth allows a horizontal layout and the motherboard slot layout matches position 6. It does not serve builds where the card must remain upright or where the slot position differs.

Limited by 2U height and fixed slot alignment

The PCIe x16 electrical interface runs through the riser without signal conversion, so bandwidth matches the host slot. Practical limits come from the 2U form factor: the assembly is noted as too tall for a D Storm 2U chassis and requires modification to fit. Builders must verify internal clearance and slot indexing before installation.

주요 특징

  • Fits 2U rack height for dense server builds
  • PCIe x16 to x16 riser keeps full bandwidth
  • Middle-position design aligns with motherboard slot 6
  • Note: too tall for D Storm 2U chassis, needs modification
  • Model DD-666-2U-M listed by manufacturer June 21, 2013

사양

BrandiStarUSA
ModelDD-666-2U-M
TypeRiser Card Middle Position
Specifications2U PCIe x16 to PCIe x16 Riser Card Middle Position
MB Slot Position: 6
*Notes: too tall for D Storm 2U chassis. need modification
배송 무게0.09 kg
포장 크기198 × 155 × 46 mm

이 상품에 대한 질문

Will the 2U riser card fit in a standard 2U chassis without modification?

The middle-position riser is noted as too tall for the D Storm 2U chassis and requires modification; verify internal clearance before installing.

Which motherboard slot does the riser connect to and how is the card secured?

It plugs into motherboard slot position 6 using a PCIe x16 edge connector; secure the riser bracket to the chassis with screws to prevent signal loss from vibration.

What long-term upkeep does the PCIe x16 riser need?

No moving parts exist; periodically reseat the edge connector and blow dust from the gold fingers to maintain reliable contact.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.