Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black rectangular PoE splitter with RJ45 ports and barrel USB-C output cables

KEHIPI

KEHIPI UCTRONICS U6114 PoE Splitter 5V 4A 20W Gigabit 802.3at Barrel USB-C

SKU CH-4TND-YJ994

Splits PoE+ into gigabit Ethernet and 5 V 4 A DC via USB-C or barrel jack for devices such as Raspberry Pi 4 or Jetson Nano

  • Ports2
  • Power Supply5 volts
  • Weight0.105 kilograms
  • Delivers 20W to power-hungry 5V devices via PoE+
  • Gigabit Ethernet maintains 1000Mbps data while supplying power
  • Dual 5.5×2.1mm barrel and USB-C output fits Raspberry Pi 4 and Jetson Nano
  • IEEE 802.3at compliant input ensures safe negotiated power delivery
  • Extends power up to 300 feet from the PoE source

Splitter for 5 V DC devices

The KEHIPI UCTRONICS U6114 separates an IEEE 802.3at PoE+ feed into a gigabit Ethernet link and a regulated 5 V supply. It terminates in both a USB-C plug and a 5.5 × 2.1 mm barrel jack so a single unit serves boards with either connector. The adapter is aimed at makers and integrators who need to power a Raspberry Pi 4, Jetson Nano or similar 5 V hardware where no mains outlet exists.

20 W output with gigabit data

The splitter delivers up to 5 V at 4 A (20 W) when fed from an 802.3at PoE+ switch or injector, and passes 10/100/1000 Mbps traffic through its RJ45 port. With an 802.3af source the available power drops below the 4 A rating, so high-draw boards may become unstable. The Ethernet cable can run up to 300 feet from the power source, but the data pair carries no voltage after the split.

Replaces a wall wart and short USB lead

It removes the need for a local AC adapter and lets you locate the device wherever a PoE cable reaches. The step up is worthwhile when you already have PoE+ infrastructure or when running mains power is impractical. It will not work with passive PoE gear, Quick Charge or Power Delivery sources, and it cannot supply voltages other than 5 V.

Privalumai

  • Delivers 20W to power-hungry 5V devices via PoE+
  • Gigabit Ethernet maintains 1000Mbps data while supplying power
  • Dual 5.5×2.1mm barrel and USB-C output fits Raspberry Pi 4 and Jetson Nano
  • IEEE 802.3at compliant input ensures safe negotiated power delivery
  • Extends power up to 300 feet from the PoE source

Specifikacijos

BrandUCTRONICS
ModelU6114
Ports2
Power Supply5 volts
Weight0.105 kilograms

Klausimai apie šią prekę

Will this splitter deliver full 5 V 4 A power if my switch only provides 802.3af PoE?

It works with 802.3af equipment but output will be below the 20 W maximum; an IEEE 802.3at PoE+ switch or injector is required for full 5 V 4 A.

How can I confirm the splitter is negotiating correctly after I connect it?

The unit powers the attached device at 5 V and the LAN port links at up to 1000 Mbps when the PoE+ handshake succeeds.

Which cables and adapters are included so I can connect both a USB-C and a barrel-jack device?

The box contains the splitter, a 5.5×2.1 mm barrel-to-USB-C adapter, a barrel-to-barrel adapter, and one Ethernet cable.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.