Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Small black rectangular PoE splitter with RJ45 ports and barrel USB-C output cables

KEHIPI

KEHIPI UCTRONICS U6114 PoE Splitter 5V 4A 20W Gigabit 802.3at Barrel USB-C

SKU CH-4TND-YJ994

Splits PoE+ into gigabit Ethernet and 5 V 4 A DC via USB-C or barrel jack for devices such as Raspberry Pi 4 or Jetson Nano

  • Ports2
  • Power Supply5 volts
  • Weight0.105 kilograms
  • Delivers 20W to power-hungry 5V devices via PoE+
  • Gigabit Ethernet maintains 1000Mbps data while supplying power
  • Dual 5.5×2.1mm barrel and USB-C output fits Raspberry Pi 4 and Jetson Nano
  • IEEE 802.3at compliant input ensures safe negotiated power delivery
  • Extends power up to 300 feet from the PoE source

Splitter for 5 V DC devices

The KEHIPI UCTRONICS U6114 separates an IEEE 802.3at PoE+ feed into a gigabit Ethernet link and a regulated 5 V supply. It terminates in both a USB-C plug and a 5.5 × 2.1 mm barrel jack so a single unit serves boards with either connector. The adapter is aimed at makers and integrators who need to power a Raspberry Pi 4, Jetson Nano or similar 5 V hardware where no mains outlet exists.

20 W output with gigabit data

The splitter delivers up to 5 V at 4 A (20 W) when fed from an 802.3at PoE+ switch or injector, and passes 10/100/1000 Mbps traffic through its RJ45 port. With an 802.3af source the available power drops below the 4 A rating, so high-draw boards may become unstable. The Ethernet cable can run up to 300 feet from the power source, but the data pair carries no voltage after the split.

Replaces a wall wart and short USB lead

It removes the need for a local AC adapter and lets you locate the device wherever a PoE cable reaches. The step up is worthwhile when you already have PoE+ infrastructure or when running mains power is impractical. It will not work with passive PoE gear, Quick Charge or Power Delivery sources, and it cannot supply voltages other than 5 V.

Акценти

  • Delivers 20W to power-hungry 5V devices via PoE+
  • Gigabit Ethernet maintains 1000Mbps data while supplying power
  • Dual 5.5×2.1mm barrel and USB-C output fits Raspberry Pi 4 and Jetson Nano
  • IEEE 802.3at compliant input ensures safe negotiated power delivery
  • Extends power up to 300 feet from the PoE source

Спецификации

BrandUCTRONICS
ModelU6114
Ports2
Power Supply5 volts
Weight0.105 kilograms

Въпроси за този артикул

Will this splitter deliver full 5 V 4 A power if my switch only provides 802.3af PoE?

It works with 802.3af equipment but output will be below the 20 W maximum; an IEEE 802.3at PoE+ switch or injector is required for full 5 V 4 A.

How can I confirm the splitter is negotiating correctly after I connect it?

The unit powers the attached device at 5 V and the LAN port links at up to 1000 Mbps when the PoE+ handshake succeeds.

Which cables and adapters are included so I can connect both a USB-C and a barrel-jack device?

The box contains the splitter, a 5.5×2.1 mm barrel-to-USB-C adapter, a barrel-to-barrel adapter, and one Ethernet cable.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.