Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with USB-C port and castellated edges

LORDWORLD

LORDWORLD RP2040-Plus Development Board 133 MHz 4MB Flash USB-C

SKU CH-H15W-K9X37

RP2040 dual-core microcontroller board with 133 MHz clock, 264 KB SRAM, 4 MB Flash, USB-C, lithium-battery header and castellated edges for direct soldering

  • Dual-core Cortex M0+ processor scales to 133 MHz for responsive real-time tasks
  • 4 MB on-board Flash plus 264 KB SRAM stores firmware and buffers without external chips
  • USB-C connector simplifies power and data cables for modern workflows
  • Lithium battery header with TPS63000 buck-boost regulator delivers 1.8 A for portable projects
  • Castellated edges enable direct soldering to carrier boards for compact production designs

RP2040 microcontroller with 4MB Flash

The LORDWORLD RP2040-Plus is a development board built around the Raspberry Pi RP2040 microcontroller. It provides a dual-core Arm Cortex M0+ processor running up to 133 MHz with 264KB of SRAM and 4MB of on-board Flash memory. The board targets makers and engineers who need a compact, programmable platform for embedded projects. A USB-C connector simplifies power and data connections.

Upgrade from basic Pico-style boards

This board adds a lithium battery recharge and discharge header for portable operation. The onboard TPS63000 buck-boost regulator delivers up to 1.8A of current for efficient power management. USB 1.1 device and host support expands connectivity options beyond simple serial links. Low-power sleep and dormant modes extend battery life in remote sensing applications.

Castellated edges for direct soldering

Castellated module edges allow the board to be soldered directly onto a carrier PCB for volume production. The USB-C port replaces older micro-USB interfaces for a more durable mechanical connection. The DC-DC chip handles a wide input voltage range without external components. Builders who need wireless connectivity or larger storage must add separate modules.

Privalumai

  • Dual-core Cortex M0+ processor scales to 133 MHz for responsive real-time tasks
  • 4 MB on-board Flash plus 264 KB SRAM stores firmware and buffers without external chips
  • USB-C connector simplifies power and data cables for modern workflows
  • Lithium battery header with TPS63000 buck-boost regulator delivers 1.8 A for portable projects
  • Castellated edges enable direct soldering to carrier boards for compact production designs

Specifikacijos

BrandLORDWORLD

Klausimai apie šią prekę

What board outline and hole pattern does the RP2040-Plus use so I can design a carrier PCB?

The board has castellated edges that match the Raspberry Pi Pico footprint, letting you solder it directly onto a carrier board without extra headers.

Which header do I solder first when adding the lithium-battery connector, and how do I avoid bridging the TPS63000 pins?

Solder the two-pin battery header before any side headers; use a fine tip and flux so the 1.8 A buck-boost chip pads stay clear of solder bridges.

How often should I check the 4 MB flash and the TPS63000 regulator for wear in a battery-powered logger?

The 4 MB flash is rated for many thousands of erase cycles, and the TPS63000 buck-boost regulator has no user-serviceable parts; inspect solder joints only if the board stops charging.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.