Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
White 20 g syringe of grey thermal compound with black cap

Maxtor Thermal

Maxtor Thermal CTG8 12.8W/mK thermal paste 20g

SKU CH-C1EV-2PXAY

High-conductivity 12.8W/mK thermal paste for CPU and GPU cooling, stable from -50 to 250°C

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C

Weight 20g

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Operates reliably from -50 °C to 250 °C
  • 20 g syringe provides enough paste for multiple applications
  • Easy centre-dot application spreads to A4-paper thickness
  • Non-volatile formula maintains stable performance over time

High-conductivity thermal paste for CPUs and GPUs

Maxtor Thermal CTG8 is a 12.8 W/mK compound built for processors and graphics cards that run hot. The syringe holds 4.0 g of non-volatile grease, enough for several socket applications. It targets gamers and enthusiasts who need reliable heat transfer without frequent re-application.

Covers multiple mounts

The 4.0 g volume handles several CPU or GPU installs, giving comfortable coverage for mainstream and high-TDP processors. Very large dies or direct-die bare-die mounting may consume the syringe faster, so buyers planning many builds should note the limited quantity.

Stable from minus 50 to 250 °C with no pump-out

Rated for continuous operation between -50 °C and 250 °C, the paste resists drying and pump-out under normal loads. Typical mounting pressure spreads it to roughly A4-paper thickness, keeping thermal resistance low and fan noise down because the cooler does not have to spin faster.

Privalumai

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Operates reliably from -50 °C to 250 °C
  • 20 g syringe provides enough paste for multiple applications
  • Easy centre-dot application spreads to A4-paper thickness
  • Non-volatile formula maintains stable performance over time

Specifikacijos

BrandMaxtor
SeriesMaxtor
ModelCTG8
Part NumberD
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 12.8 W/mK conductivity work with an older CPU cooler that still uses a standard mounting bracket?

Yes — the 12.8 W/mK paste is a universal compound that fills microscopic gaps between any CPU or GPU die and the cooler base, regardless of bracket design.

How can I verify the paste is performing correctly after I apply it?

After mounting the cooler, monitor CPU and GPU temperatures under load; they should stay within the rated -50 to 250 °C operating window and show lower peaks than with the previous compound.

The listing mentions 20 g — does the box contain a single 20 g syringe or multiple smaller tubes?

The package includes one 4.0 g syringe; the 20 g figure refers to the multipack quantity, so additional syringes must be purchased separately for larger builds.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.