저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
White 20 g syringe of grey thermal compound with black cap

Maxtor Thermal

Maxtor Thermal CTG8 12.8W/mK thermal paste 20g

SKU CH-C1EV-2PXAY

High-conductivity 12.8W/mK thermal paste for CPU and GPU cooling, stable from -50 to 250°C

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C

Weight 20g

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Operates reliably from -50 °C to 250 °C
  • 20 g syringe provides enough paste for multiple applications
  • Easy centre-dot application spreads to A4-paper thickness
  • Non-volatile formula maintains stable performance over time

High-conductivity thermal paste for CPUs and GPUs

Maxtor Thermal CTG8 is a 12.8 W/mK compound built for processors and graphics cards that run hot. The syringe holds 4.0 g of non-volatile grease, enough for several socket applications. It targets gamers and enthusiasts who need reliable heat transfer without frequent re-application.

Covers multiple mounts

The 4.0 g volume handles several CPU or GPU installs, giving comfortable coverage for mainstream and high-TDP processors. Very large dies or direct-die bare-die mounting may consume the syringe faster, so buyers planning many builds should note the limited quantity.

Stable from minus 50 to 250 °C with no pump-out

Rated for continuous operation between -50 °C and 250 °C, the paste resists drying and pump-out under normal loads. Typical mounting pressure spreads it to roughly A4-paper thickness, keeping thermal resistance low and fan noise down because the cooler does not have to spin faster.

주요 특징

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Operates reliably from -50 °C to 250 °C
  • 20 g syringe provides enough paste for multiple applications
  • Easy centre-dot application spreads to A4-paper thickness
  • Non-volatile formula maintains stable performance over time

사양

BrandMaxtor
SeriesMaxtor
ModelCTG8
Part NumberD
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 12.8 W/mK conductivity work with an older CPU cooler that still uses a standard mounting bracket?

Yes — the 12.8 W/mK paste is a universal compound that fills microscopic gaps between any CPU or GPU die and the cooler base, regardless of bracket design.

How can I verify the paste is performing correctly after I apply it?

After mounting the cooler, monitor CPU and GPU temperatures under load; they should stay within the rated -50 to 250 °C operating window and show lower peaks than with the previous compound.

The listing mentions 20 g — does the box contain a single 20 g syringe or multiple smaller tubes?

The package includes one 4.0 g syringe; the 20 g figure refers to the multipack quantity, so additional syringes must be purchased separately for larger builds.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.