저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Grey syringe of Maxtor CTG8D thermal paste 4.0g with spreader tool

Maxtor Thermal

Maxtor Thermal CTG8D 12.8W/mK 4.0g thermal paste

SKU CH-B9H5-7ZQFV

High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achievin

Weight 4g

  • Efficient heat transfer with 12.8W/mK conductivity
  • Stable performance from -50 to 250°C
  • Non-conductive formula eliminates short-circuit risk
  • 0g syringe with tools enables precise application
  • Proper paste use can extend device life 20-40%

Maxtor CTG8D 12.8W/mK 4.0g thermal paste

Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.

Suited for overclockers and high-TDP builds.

This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.

12.8W/mK conductivity drives the purchase decision

The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.

주요 특징

  • Efficient heat transfer with 12.8W/mK conductivity
  • Stable performance from -50 to 250°C
  • Non-conductive formula eliminates short-circuit risk
  • 0g syringe with tools enables precise application
  • Proper paste use can extend device life 20-40%

사양

BrandMaxtor
SeriesCTG
Model8D
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What cooler or heat-sink do I already need to use this 12.8W/mK paste with my CPU or GPU?

You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.

Will this 4.0g syringe work on an older processor that previously used a lower-conductivity compound?

Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.

How can I verify the paste is applied correctly after following the centre-dot and scraper steps?

The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.