Maxtor Thermal CTG8 12.8W/mK thermal paste 2.0g
- 2.0g
- 12.8W/mK
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Maxtor Thermal
High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling
Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.
This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.
The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.
| Brand | Maxtor |
|---|---|
| Series | CTG |
| Model | 8D |
| Volume / Net Weight | 4.0g |
| Thermal Conductivity | 12.8W/mK |
| Long Term Operating Temperature | -50 to 250 C |
| Specifications | The thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250 |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.
Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.
The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม