Maxtor Thermal
Maxtor Thermal CTG8D 12.8W/mK 4.0g thermal paste
High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling
- Volume / Net Weight4.0g
- Thermal Conductivity12.8W/mK
- Long Term Operating Temperature-50 to 250 C
- SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achievin
- Efficient heat transfer with 12.8W/mK conductivity
- Stable performance from -50 to 250°C
- Non-conductive formula eliminates short-circuit risk
- 0g syringe with tools enables precise application
- Proper paste use can extend device life 20-40%
Maxtor CTG8D 12.8W/mK 4.0g thermal paste
Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.
Suited for overclockers and high-TDP builds.
This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.
12.8W/mK conductivity drives the purchase decision
The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.
Priekšrocības
- Efficient heat transfer with 12.8W/mK conductivity
- Stable performance from -50 to 250°C
- Non-conductive formula eliminates short-circuit risk
- 0g syringe with tools enables precise application
- Proper paste use can extend device life 20-40%
Specifikācijas
| Brand | Maxtor |
|---|---|
| Series | CTG |
| Model | 8D |
| Volume / Net Weight | 4.0g |
| Thermal Conductivity | 12.8W/mK |
| Long Term Operating Temperature | -50 to 250 C |
| Specifications | The thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250 |
Citas šī modeļa versijas
Vēl 3 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Maxtor Thermal
Maxtor Thermal CTG8 12.8W/mK thermal paste 4.0g
- 4.0g
- 12.8W/mK
14,99 $
0.00019161BTC
KrājumāJautājumi par šo preci
What cooler or heat-sink do I already need to use this 12.8W/mK paste with my CPU or GPU?
You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.
Will this 4.0g syringe work on an older processor that previously used a lower-conductivity compound?
Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.
How can I verify the paste is applied correctly after following the centre-dot and scraper steps?
The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Krājumā