Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver syringe with grey thermal paste inside, 4.0g

Maxtor Thermal

Maxtor Thermal CTG8 12.8W/mK thermal paste 4.0g

SKU CH-MT84-APX92

High-conductivity 12.8 W/mK paste in a 4.0 g syringe for CPU and GPU cooling from –50 to 250 °C

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C

Weight 10g

  • High conductivity of 12.8W/mK moves heat fast from CPU and GPU
  • 0g syringe gives enough paste for multiple applications with easy spreading
  • Stable from -50 to 250 C handles extreme overclocking and daily loads
  • Non-volatile formula keeps performance steady without drying out over time
  • Simple four-step method lets anyone apply a thin, even layer quickly

High-conductivity paste for CPU and GPU

Maxtor CTG8 thermal compound delivers a rated thermal conductivity of 12.8W/mK in a 4.0g syringe. It is formulated for processors and graphics cards that run hot under heavy workloads. The paste suits builders who need reliable heat transfer between die and cooler. It is not for users who require electrically conductive liquid metal or larger volumes for multiple builds.

Consistent spread under continuous load

The compound remains stable and does not volatilise easily during extended gaming or rendering sessions. Its viscosity allows a uniform layer roughly the thickness of an A4 sheet after mounting pressure is applied. This behaviour helps maintain steady temperatures when the system is stressed for hours. It is not for applications that demand phase-change pads or pre-applied factory films.

Wide temperature range with low maintenance

The product operates from minus 50 to 250 degrees Celsius, covering typical desktop and high-TDP scenarios. Because it resists drying out, thermal resistance stays low without frequent re-application. The non-conductive formula avoids short-circuit risk if excess spreads beyond the die. It is not for sub-ambient cooling loops that require specialised cryogenic pastes.

Priekšrocības

  • High conductivity of 12.8W/mK moves heat fast from CPU and GPU
  • 0g syringe gives enough paste for multiple applications with easy spreading
  • Stable from -50 to 250 C handles extreme overclocking and daily loads
  • Non-volatile formula keeps performance steady without drying out over time
  • Simple four-step method lets anyone apply a thin, even layer quickly

Specifikācijas

BrandMaxtor
SeriesMaxtor
ModelCTG8
Part NumberD
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 12.8W/mK conductivity keep temperatures low during all-day gaming?

The 12.8W/mK rating supports efficient heat transfer from CPU or GPU dies, helping maintain lower temperatures under sustained high-TDP loads.

What tools do I need to apply the 4.0g syringe paste?

You need a clean CPU or GPU surface, isopropyl alcohol for cleaning, and a scraper or spreader to achieve an A4-paper-thin layer.

Can this paste stay stable on an older cooler that runs hotter than modern ones?

The compound remains stable from -50 to 250 °C and is non-volatile, so it will not dry out or degrade on legacy coolers running at higher temperatures.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.