אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Silver syringe with grey thermal paste inside, 4.0g

Maxtor Thermal

Maxtor Thermal CTG8 12.8W/mK thermal paste 4.0g

SKU CH-MT84-APX92

High-conductivity 12.8 W/mK paste in a 4.0 g syringe for CPU and GPU cooling from –50 to 250 °C

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C

Weight 10g

  • High conductivity of 12.8W/mK moves heat fast from CPU and GPU
  • 0g syringe gives enough paste for multiple applications with easy spreading
  • Stable from -50 to 250 C handles extreme overclocking and daily loads
  • Non-volatile formula keeps performance steady without drying out over time
  • Simple four-step method lets anyone apply a thin, even layer quickly

High-conductivity paste for CPU and GPU

Maxtor CTG8 thermal compound delivers a rated thermal conductivity of 12.8W/mK in a 4.0g syringe. It is formulated for processors and graphics cards that run hot under heavy workloads. The paste suits builders who need reliable heat transfer between die and cooler. It is not for users who require electrically conductive liquid metal or larger volumes for multiple builds.

Consistent spread under continuous load

The compound remains stable and does not volatilise easily during extended gaming or rendering sessions. Its viscosity allows a uniform layer roughly the thickness of an A4 sheet after mounting pressure is applied. This behaviour helps maintain steady temperatures when the system is stressed for hours. It is not for applications that demand phase-change pads or pre-applied factory films.

Wide temperature range with low maintenance

The product operates from minus 50 to 250 degrees Celsius, covering typical desktop and high-TDP scenarios. Because it resists drying out, thermal resistance stays low without frequent re-application. The non-conductive formula avoids short-circuit risk if excess spreads beyond the die. It is not for sub-ambient cooling loops that require specialised cryogenic pastes.

נקודות עיקריות

  • High conductivity of 12.8W/mK moves heat fast from CPU and GPU
  • 0g syringe gives enough paste for multiple applications with easy spreading
  • Stable from -50 to 250 C handles extreme overclocking and daily loads
  • Non-volatile formula keeps performance steady without drying out over time
  • Simple four-step method lets anyone apply a thin, even layer quickly

מפרט טכני

BrandMaxtor
SeriesMaxtor
ModelCTG8
Part NumberD
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C

גרסאות נוספות של דגם זה

3 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Will the 12.8W/mK conductivity keep temperatures low during all-day gaming?

The 12.8W/mK rating supports efficient heat transfer from CPU or GPU dies, helping maintain lower temperatures under sustained high-TDP loads.

What tools do I need to apply the 4.0g syringe paste?

You need a clean CPU or GPU surface, isopropyl alcohol for cleaning, and a scraper or spreader to achieve an A4-paper-thin layer.

Can this paste stay stable on an older cooler that runs hotter than modern ones?

The compound remains stable from -50 to 250 °C and is non-volatile, so it will not dry out or degrade on legacy coolers running at higher temperatures.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.