Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver syringe with grey thermal paste inside, 4.0g

Maxtor Thermal

Maxtor Thermal CTG8 12.8W/mK thermal paste 4.0g

SKU CH-MT84-APX92

High-conductivity 12.8 W/mK paste in a 4.0 g syringe for CPU and GPU cooling from –50 to 250 °C

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C

Weight 10g

  • High conductivity of 12.8W/mK moves heat fast from CPU and GPU
  • 0g syringe gives enough paste for multiple applications with easy spreading
  • Stable from -50 to 250 C handles extreme overclocking and daily loads
  • Non-volatile formula keeps performance steady without drying out over time
  • Simple four-step method lets anyone apply a thin, even layer quickly

High-conductivity paste for CPU and GPU

Maxtor CTG8 thermal compound delivers a rated thermal conductivity of 12.8W/mK in a 4.0g syringe. It is formulated for processors and graphics cards that run hot under heavy workloads. The paste suits builders who need reliable heat transfer between die and cooler. It is not for users who require electrically conductive liquid metal or larger volumes for multiple builds.

Consistent spread under continuous load

The compound remains stable and does not volatilise easily during extended gaming or rendering sessions. Its viscosity allows a uniform layer roughly the thickness of an A4 sheet after mounting pressure is applied. This behaviour helps maintain steady temperatures when the system is stressed for hours. It is not for applications that demand phase-change pads or pre-applied factory films.

Wide temperature range with low maintenance

The product operates from minus 50 to 250 degrees Celsius, covering typical desktop and high-TDP scenarios. Because it resists drying out, thermal resistance stays low without frequent re-application. The non-conductive formula avoids short-circuit risk if excess spreads beyond the die. It is not for sub-ambient cooling loops that require specialised cryogenic pastes.

Privalumai

  • High conductivity of 12.8W/mK moves heat fast from CPU and GPU
  • 0g syringe gives enough paste for multiple applications with easy spreading
  • Stable from -50 to 250 C handles extreme overclocking and daily loads
  • Non-volatile formula keeps performance steady without drying out over time
  • Simple four-step method lets anyone apply a thin, even layer quickly

Specifikacijos

BrandMaxtor
SeriesMaxtor
ModelCTG8
Part NumberD
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 12.8W/mK conductivity keep temperatures low during all-day gaming?

The 12.8W/mK rating supports efficient heat transfer from CPU or GPU dies, helping maintain lower temperatures under sustained high-TDP loads.

What tools do I need to apply the 4.0g syringe paste?

You need a clean CPU or GPU surface, isopropyl alcohol for cleaning, and a scraper or spreader to achieve an A4-paper-thin layer.

Can this paste stay stable on an older cooler that runs hotter than modern ones?

The compound remains stable from -50 to 250 °C and is non-volatile, so it will not dry out or degrade on legacy coolers running at higher temperatures.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.