Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Grey syringe of Maxtor CTG8D thermal paste 4.0g with spreader tool

Maxtor Thermal

Maxtor Thermal CTG8D 12.8W/mK 4.0g thermal paste

SKU CH-B9H5-7ZQFV

High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achievin

Weight 4g

  • Efficient heat transfer with 12.8W/mK conductivity
  • Stable performance from -50 to 250°C
  • Non-conductive formula eliminates short-circuit risk
  • 0g syringe with tools enables precise application
  • Proper paste use can extend device life 20-40%

Maxtor CTG8D 12.8W/mK 4.0g thermal paste

Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.

Suited for overclockers and high-TDP builds.

This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.

12.8W/mK conductivity drives the purchase decision

The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.

Βασικά χαρακτηριστικά

  • Efficient heat transfer with 12.8W/mK conductivity
  • Stable performance from -50 to 250°C
  • Non-conductive formula eliminates short-circuit risk
  • 0g syringe with tools enables precise application
  • Proper paste use can extend device life 20-40%

Προδιαγραφές

BrandMaxtor
SeriesCTG
Model8D
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250

Άλλες εκδόσεις αυτού του μοντέλου

3 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

What cooler or heat-sink do I already need to use this 12.8W/mK paste with my CPU or GPU?

You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.

Will this 4.0g syringe work on an older processor that previously used a lower-conductivity compound?

Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.

How can I verify the paste is applied correctly after following the centre-dot and scraper steps?

The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.