Maxtor Thermal CTG8 12.8W/mK thermal paste 2.0g
- 2.0g
- 12.8W/mK
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Maxtor Thermal
High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling
Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.
This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.
The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.
| Brand | Maxtor |
|---|---|
| Series | CTG |
| Model | 8D |
| Volume / Net Weight | 4.0g |
| Thermal Conductivity | 12.8W/mK |
| Long Term Operating Temperature | -50 to 250 C |
| Specifications | The thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250 |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.
Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.
The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?