暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey syringe of Maxtor CTG8D thermal paste 4.0g with spreader tool

Maxtor Thermal

Maxtor Thermal CTG8D 12.8W/mK 4.0g thermal paste

SKU CH-B9H5-7ZQFV

High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achievin

Weight 4g

  • 4g
  • 20g
  • 2 g
  • 10g

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Efficient heat transfer with 12.8W/mK conductivity
  • Stable performance from -50 to 250°C
  • Non-conductive formula eliminates short-circuit risk
  • 0g syringe with tools enables precise application
  • Proper paste use can extend device life 20-40%

Maxtor CTG8D 12.8W/mK 4.0g thermal paste

Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.

Suited for overclockers and high-TDP builds.

This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.

12.8W/mK conductivity drives the purchase decision

The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.

特長

  • Efficient heat transfer with 12.8W/mK conductivity
  • Stable performance from -50 to 250°C
  • Non-conductive formula eliminates short-circuit risk
  • 0g syringe with tools enables precise application
  • Proper paste use can extend device life 20-40%

仕様

BrandMaxtor
SeriesCTG
Model8D
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsThe thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What cooler or heat-sink do I already need to use this 12.8W/mK paste with my CPU or GPU?

You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.

Will this 4.0g syringe work on an older processor that previously used a lower-conductivity compound?

Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.

How can I verify the paste is applied correctly after following the centre-dot and scraper steps?

The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。