Maxtor Thermal CTG8 12.8W/mK thermal paste 2.0g
- 2.0g
- 12.8W/mK
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Maxtor Thermal
High-conductivity 12.8 W/mK thermal paste in a 4.0 g syringe for CPU and GPU cooling
Maxtor Thermal CTG8D is a 4.0g syringe of thermal compound rated at 12.8W/mK. It is formulated to transfer heat between a CPU or GPU and its cooler. The non-conductive paste eliminates short-circuit risk during application. It operates reliably from -50 to 250 C.
This paste targets enthusiasts running high-TDP processors or graphics cards who need above-average thermal conductivity. The 2025 ITSMA report notes proper grease use can extend device lifespan by 20 to 40 percent. Builders with standard 6 to 9W/mK requirements or those seeking a lower-cost option for basic cooling should look elsewhere.
The single specification that decides fit is the 12.8W/mK thermal conductivity rating. It determines whether the paste can handle the heat load of your specific overclocked or high-wattage component. Verify your cooler mounting pressure and die size match typical enthusiast usage before buying.
| Brand | Maxtor |
|---|---|
| Series | CTG |
| Model | 8D |
| Volume / Net Weight | 4.0g |
| Thermal Conductivity | 12.8W/mK |
| Long Term Operating Temperature | -50 to 250 C |
| Specifications | The thermal conductivity of CTG8D reaches 12.8W/mK, achieving above average performance on the market at a relatively moderate price. It can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming laptops, desktop computers, and mid-range graphics cards. The non-conductive formula completely avoids the risk of short circuit, and can be easily extended into a uniform thin layer (recommended thickness of 0.2mm) by single point extrusion, with simple operation. After curing, it can withstand temperatures ranging from -50 ° C to 250 |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
You need a compatible CPU or GPU cooler with a flat mounting surface; the paste fills microscopic gaps between the die and that cooler base.
Yes, it is non-conductive and rated from -50 to 250 °C, so it replaces older pastes on legacy CPUs or GPUs without electrical risk.
The layer should be roughly the thickness of an A4 sheet; a drop in load temperatures compared with the previous compound confirms good contact.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?