Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
White 20 g syringe of grey thermal compound with black cap

Maxtor Thermal

Maxtor Thermal CTG8 12.8W/mK thermal paste 20g

SKU CH-C1EV-2PXAY

High-conductivity 12.8W/mK thermal paste for CPU and GPU cooling, stable from -50 to 250°C

  • Volume / Net Weight4.0g
  • Thermal Conductivity12.8W/mK
  • Long Term Operating Temperature-50 to 250 C

Weight 20g

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Operates reliably from -50 °C to 250 °C
  • 20 g syringe provides enough paste for multiple applications
  • Easy centre-dot application spreads to A4-paper thickness
  • Non-volatile formula maintains stable performance over time

High-conductivity thermal paste for CPUs and GPUs

Maxtor Thermal CTG8 is a 12.8 W/mK compound built for processors and graphics cards that run hot. The syringe holds 4.0 g of non-volatile grease, enough for several socket applications. It targets gamers and enthusiasts who need reliable heat transfer without frequent re-application.

Covers multiple mounts

The 4.0 g volume handles several CPU or GPU installs, giving comfortable coverage for mainstream and high-TDP processors. Very large dies or direct-die bare-die mounting may consume the syringe faster, so buyers planning many builds should note the limited quantity.

Stable from minus 50 to 250 °C with no pump-out

Rated for continuous operation between -50 °C and 250 °C, the paste resists drying and pump-out under normal loads. Typical mounting pressure spreads it to roughly A4-paper thickness, keeping thermal resistance low and fan noise down because the cooler does not have to spin faster.

Høydepunkter

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Operates reliably from -50 °C to 250 °C
  • 20 g syringe provides enough paste for multiple applications
  • Easy centre-dot application spreads to A4-paper thickness
  • Non-volatile formula maintains stable performance over time

Spesifikasjoner

BrandMaxtor
SeriesMaxtor
ModelCTG8
Part NumberD
Volume / Net Weight4.0g
Thermal Conductivity12.8W/mK
Long Term Operating Temperature-50 to 250 C

Andre versjoner av denne modellen

3 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the 12.8 W/mK conductivity work with an older CPU cooler that still uses a standard mounting bracket?

Yes — the 12.8 W/mK paste is a universal compound that fills microscopic gaps between any CPU or GPU die and the cooler base, regardless of bracket design.

How can I verify the paste is performing correctly after I apply it?

After mounting the cooler, monitor CPU and GPU temperatures under load; they should stay within the rated -50 to 250 °C operating window and show lower peaks than with the previous compound.

The listing mentions 20 g — does the box contain a single 20 g syringe or multiple smaller tubes?

The package includes one 4.0 g syringe; the 20 g figure refers to the multipack quantity, so additional syringes must be purchased separately for larger builds.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.