Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Montech

Montech TITAN PLA 850 850 W ATX 3.1 Platinum power supply

SKU CH-HN7X-165XE MPN TITAN PLA 850

850 W fully modular ATX 3.1 unit with 80 PLUS Platinum efficiency, a 135 mm FDB fan and a 12V-2x6 connector for modern GPUs

  • TypeATX12V / EPS12V
  • Maximum Power850 W
  • Fans1 x 135 mm
  • PFCActive
  • Main Connector20+4Pin
  • Max PSU Length160 mm
  • Platinum efficiency saves energy with 90% rated performance
  • Fully modular design keeps builds clean using only needed cables
  • ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
  • 135 mm FDB fan stays off below 20% load for silent operation
  • Compact 160 mm depth fits small cases while delivering 850 W

Platinum 850 W ATX 3.1 unit

The Montech TITAN PLA 850 is a fully modular ATX 3.1 power supply rated at 850 W. It carries 80 PLUS Platinum and Cybenetics Platinum certifications for 90 % efficiency. A 135 mm FDB fan runs in zero-fan mode below 20 % load. The unit is built in collaboration with Seasonic.

ATX 3.1 and PCIe 5.1 limits

The supply meets ATX 3.1 and PCIe 5.1 specifications and includes a native 12V-2x6 connector. Peak power can reach twice the rated 850 W. GPU peak support is rated at three times the graphics card wattage. Hold-up time exceeds 21 ms. Input range is 100 to 240 V at 50 or 60 Hz.

Check cables and clearances

Verify your motherboard needs one 20+4 pin and two CPU 4+4 pin connectors. Ensure the graphics card can use the single 12V-2x6 or three PCIe 6+2 pin plugs. Confirm the 160 mm depth fits your case. Count SATA and Molex devices against twelve SATA and four Molex headers.

Privalumai

  • Platinum efficiency saves energy with 90% rated performance
  • Fully modular design keeps builds clean using only needed cables
  • ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
  • 135 mm FDB fan stays off below 20% load for silent operation
  • Compact 160 mm depth fits small cases while delivering 850 W

Specifikacijos

BrandMontech
ModelTITAN PLA 850
TypeATX12V / EPS12V
Maximum Power850 W
Fans1 x 135 mm
PFCActive
Main Connector20+4Pin
Max PSU Length160 mm
ModularFull Modular
Energy-Efficient80 PLUS PLATINUM Certified
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current20A@+3.3V, 20A@+5V, 70A@+12V, 0.3A@-12V, 3A@+5VSB
ApprovalscTUVus / TUV / RCM / CB / CE / UKCA/ CCC / EAC FCC_ICES / BSMI / RoHS / KC_MSIP
ConnectorsM/B 20+4 Pin: 1
CPU 4+4 Pin: 2
PCIe 6+2 Pin: 3
12V-2x6 PCIe 5.1: 1
SATA: 12
Molex 4 Pin: 4
Dimensions150 x 160 x 86 mm
Siuntos svoris3.70 kg
Pakuotės dydis343 × 191 × 127 mm

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Should I pick the 850 W version or a different capacity?

The TITAN PLA 850 is the single capacity offered in this series; its 850 W rating matches builds that need strong 12 V output and full modular cabling.

What does the 850 W rating mean once the unit is installed?

It supplies up to 850 W continuously with 90 % typical efficiency and holds voltage above 21 ms during power loss.

Which standard does the 12V-2x6 connector follow and what does it cap?

The 12V-2x6 connector follows ATX 3.1 and PCIe 5.1, supporting peak GPU power up to three times the card's rated wattage.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.