Montech
Montech TITAN PLA 850 850 W ATX 3.1 Platinum power supply
850 W fully modular ATX 3.1 unit with 80 PLUS Platinum efficiency, a 135 mm FDB fan and a 12V-2x6 connector for modern GPUs
- TypeATX12V / EPS12V
- Maximum Power850 W
- Fans1 x 135 mm
- PFCActive
- Main Connector20+4Pin
- Max PSU Length160 mm
Options ATX 80+ Platinum (850W)
- Platinum efficiency saves energy with 90% rated performance
- Fully modular design keeps builds clean using only needed cables
- ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
- 135 mm FDB fan stays off below 20% load for silent operation
- Compact 160 mm depth fits small cases while delivering 850 W
Platinum 850 W ATX 3.1 unit
The Montech TITAN PLA 850 is a fully modular ATX 3.1 power supply rated at 850 W. It carries 80 PLUS Platinum and Cybenetics Platinum certifications for 90 % efficiency. A 135 mm FDB fan runs in zero-fan mode below 20 % load. The unit is built in collaboration with Seasonic.
ATX 3.1 and PCIe 5.1 limits
The supply meets ATX 3.1 and PCIe 5.1 specifications and includes a native 12V-2x6 connector. Peak power can reach twice the rated 850 W. GPU peak support is rated at three times the graphics card wattage. Hold-up time exceeds 21 ms. Input range is 100 to 240 V at 50 or 60 Hz.
Check cables and clearances
Verify your motherboard needs one 20+4 pin and two CPU 4+4 pin connectors. Ensure the graphics card can use the single 12V-2x6 or three PCIe 6+2 pin plugs. Confirm the 160 mm depth fits your case. Count SATA and Molex devices against twelve SATA and four Molex headers.
Points forts
- Platinum efficiency saves energy with 90% rated performance
- Fully modular design keeps builds clean using only needed cables
- ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
- 135 mm FDB fan stays off below 20% load for silent operation
- Compact 160 mm depth fits small cases while delivering 850 W
Caractéristiques
| Brand | Montech |
|---|---|
| Model | TITAN PLA 850 |
| Type | ATX12V / EPS12V |
| Maximum Power | 850 W |
| Fans | 1 x 135 mm |
| PFC | Active |
| Main Connector | 20+4Pin |
| Max PSU Length | 160 mm |
| Modular | Full Modular |
| Energy-Efficient | 80 PLUS PLATINUM Certified |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 20A@+3.3V, 20A@+5V, 70A@+12V, 0.3A@-12V, 3A@+5VSB |
| Approvals | cTUVus / TUV / RCM / CB / CE / UKCA/ CCC / EAC FCC_ICES / BSMI / RoHS / KC_MSIP |
| Connectors | M/B 20+4 Pin: 1 CPU 4+4 Pin: 2 PCIe 6+2 Pin: 3 12V-2x6 PCIe 5.1: 1 SATA: 12 Molex 4 Pin: 4 |
| Dimensions | 150 x 160 x 86 mm |
| Poids d’expédition | 3.70 kg |
| Dimensions du colis | 343 × 191 × 127 mm |
Autres versions de ce modèle
5 de plus dans cette gamme
Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.
Montech TITAN PLA 750 750 W ATX 3.1 Platinum power supply
- ATX12V / EPS12V
- 750 W
Montech TITAN PLA 1000 1000 W power supply, ATX 3.1, full modular, platinum
- ATX12V / EPS12V
- 1000 W
Montech TITAN PLA 1200 1200W full modular ATX power supply
- ATX12V / EPS12V
- 1200 W
Questions sur cet article
Should I pick the 850 W version or a different capacity?
The TITAN PLA 850 is the single capacity offered in this series; its 850 W rating matches builds that need strong 12 V output and full modular cabling.
What does the 850 W rating mean once the unit is installed?
It supplies up to 850 W continuously with 90 % typical efficiency and holds voltage above 21 ms during power loss.
Which standard does the 12V-2x6 connector follow and what does it cap?
The 12V-2x6 connector follows ATX 3.1 and PCIe 5.1, supporting peak GPU power up to three times the card's rated wattage.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W








