Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Rectangular black PSU with 135 mm fan and modular sockets

Montech

Montech TITAN PLA 850 850 W ATX 3.1 Platinum power supply

SKU CH-HN7X-165XE MPN TITAN PLA 850

850 W fully modular ATX 3.1 unit with 80 PLUS Platinum efficiency, a 135 mm FDB fan and a 12V-2x6 connector for modern GPUs

  • TypeATX12V / EPS12V
  • Maximum Power850 W
  • Fans1 x 135 mm
  • PFCActive
  • Main Connector20+4Pin
  • Max PSU Length160 mm

Options ATX 80+ Platinum (850W)

  • Platinum efficiency saves energy with 90% rated performance
  • Fully modular design keeps builds clean using only needed cables
  • ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
  • 135 mm FDB fan stays off below 20% load for silent operation
  • Compact 160 mm depth fits small cases while delivering 850 W

Platinum 850 W ATX 3.1 unit

The Montech TITAN PLA 850 is a fully modular ATX 3.1 power supply rated at 850 W. It carries 80 PLUS Platinum and Cybenetics Platinum certifications for 90 % efficiency. A 135 mm FDB fan runs in zero-fan mode below 20 % load. The unit is built in collaboration with Seasonic.

ATX 3.1 and PCIe 5.1 limits

The supply meets ATX 3.1 and PCIe 5.1 specifications and includes a native 12V-2x6 connector. Peak power can reach twice the rated 850 W. GPU peak support is rated at three times the graphics card wattage. Hold-up time exceeds 21 ms. Input range is 100 to 240 V at 50 or 60 Hz.

Check cables and clearances

Verify your motherboard needs one 20+4 pin and two CPU 4+4 pin connectors. Ensure the graphics card can use the single 12V-2x6 or three PCIe 6+2 pin plugs. Confirm the 160 mm depth fits your case. Count SATA and Molex devices against twelve SATA and four Molex headers.

Öne çıkanlar

  • Platinum efficiency saves energy with 90% rated performance
  • Fully modular design keeps builds clean using only needed cables
  • ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
  • 135 mm FDB fan stays off below 20% load for silent operation
  • Compact 160 mm depth fits small cases while delivering 850 W

Teknik özellikler

BrandMontech
ModelTITAN PLA 850
TypeATX12V / EPS12V
Maximum Power850 W
Fans1 x 135 mm
PFCActive
Main Connector20+4Pin
Max PSU Length160 mm
ModularFull Modular
Energy-Efficient80 PLUS PLATINUM Certified
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current20A@+3.3V, 20A@+5V, 70A@+12V, 0.3A@-12V, 3A@+5VSB
ApprovalscTUVus / TUV / RCM / CB / CE / UKCA/ CCC / EAC FCC_ICES / BSMI / RoHS / KC_MSIP
ConnectorsM/B 20+4 Pin: 1
CPU 4+4 Pin: 2
PCIe 6+2 Pin: 3
12V-2x6 PCIe 5.1: 1
SATA: 12
Molex 4 Pin: 4
Dimensions150 x 160 x 86 mm
Kargo ağırlığı3.70 kg
Koli boyutu343 × 191 × 127 mm

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Should I pick the 850 W version or a different capacity?

The TITAN PLA 850 is the single capacity offered in this series; its 850 W rating matches builds that need strong 12 V output and full modular cabling.

What does the 850 W rating mean once the unit is installed?

It supplies up to 850 W continuously with 90 % typical efficiency and holds voltage above 21 ms during power loss.

Which standard does the 12V-2x6 connector follow and what does it cap?

The 12V-2x6 connector follows ATX 3.1 and PCIe 5.1, supporting peak GPU power up to three times the card's rated wattage.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.