Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Six black ATX 24-pin dual PSU extension cables, 30 cm each

myVolts

myVolts 6× ATX 30 cm 24-pin dual PSU extension cable

SKU CH-JDRP-RZCTP

A 30 cm ATX splitter connects one motherboard to two power supplies with 24-pin connectors, rated for 2000 W

  • TypeAT
  • Connects two PSUs to one motherboard via 24-pin splitter
  • 30 cm length fits tight chassis layouts
  • Supports combined loads up to 2000 W
  • Powers on both supplies simultaneously with single signal
  • Works with 20-pin and 24-pin ATX boards

Dual PSU splitter for mining rigs

This cable splits a single motherboard 24-pin connector into two 24-pin female ends so a second power supply can be started in sync. It lets builders run multiple graphics cards or drives from one board without buying another motherboard. Each lead is 30 cm long and rated for a combined draw of 2000 W. The pack contains six identical cables for multi-GPU rigs.

Suits builders adding a second PSU to an existing

It works with both 20-pin and 24-pin ATX motherboards and any pair of standard ATX units. The synchronous start signal turns both supplies on and off together. Systems that need fully isolated rails or independent PSU control cannot use this adapter. Buyers whose cases lack physical space for two power supplies should look at something else.

Handles up to 2000 W across both supplies

The 24-pin male plug feeds the motherboard while the two female sockets accept the PSU cables. Power from the first supply should stay on the board; the second supply should only feed drives or peripheral devices. Mixing outputs between the two units is not supported. The 30 cm length gives enough reach for typical chassis layouts without excess slack.

Privalumai

  • Connects two PSUs to one motherboard via 24-pin splitter
  • 30 cm length fits tight chassis layouts
  • Supports combined loads up to 2000 W
  • Powers on both supplies simultaneously with single signal
  • Works with 20-pin and 24-pin ATX boards

Specifikacijos

TypeAT

Klausimai apie šią prekę

What motherboard connector do I need for this cable to work?

The cable plugs into a standard 24-pin ATX motherboard socket and also fits 20-pin boards.

Can I use this splitter with two different power supply models?

Yes, the dual 24-pin female ends accept any two ATX power supplies.

How do I verify both power supplies start together after connecting the cable?

Press the case power button; both PSUs should spin up at the same time.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.