Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six black ATX 24-pin dual PSU extension cables, 30 cm each

myVolts

myVolts 6× ATX 30 cm 24-pin dual PSU extension cable

SKU CH-JDRP-RZCTP

A 30 cm ATX splitter connects one motherboard to two power supplies with 24-pin connectors, rated for 2000 W

  • TypeAT
  • Connects two PSUs to one motherboard via 24-pin splitter
  • 30 cm length fits tight chassis layouts
  • Supports combined loads up to 2000 W
  • Powers on both supplies simultaneously with single signal
  • Works with 20-pin and 24-pin ATX boards

Dual PSU splitter for mining rigs

This cable splits a single motherboard 24-pin connector into two 24-pin female ends so a second power supply can be started in sync. It lets builders run multiple graphics cards or drives from one board without buying another motherboard. Each lead is 30 cm long and rated for a combined draw of 2000 W. The pack contains six identical cables for multi-GPU rigs.

Suits builders adding a second PSU to an existing

It works with both 20-pin and 24-pin ATX motherboards and any pair of standard ATX units. The synchronous start signal turns both supplies on and off together. Systems that need fully isolated rails or independent PSU control cannot use this adapter. Buyers whose cases lack physical space for two power supplies should look at something else.

Handles up to 2000 W across both supplies

The 24-pin male plug feeds the motherboard while the two female sockets accept the PSU cables. Power from the first supply should stay on the board; the second supply should only feed drives or peripheral devices. Mixing outputs between the two units is not supported. The 30 cm length gives enough reach for typical chassis layouts without excess slack.

Kohokohdat

  • Connects two PSUs to one motherboard via 24-pin splitter
  • 30 cm length fits tight chassis layouts
  • Supports combined loads up to 2000 W
  • Powers on both supplies simultaneously with single signal
  • Works with 20-pin and 24-pin ATX boards

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What motherboard connector do I need for this cable to work?

The cable plugs into a standard 24-pin ATX motherboard socket and also fits 20-pin boards.

Can I use this splitter with two different power supply models?

Yes, the dual 24-pin female ends accept any two ATX power supplies.

How do I verify both power supplies start together after connecting the cable?

Press the case power button; both PSUs should spin up at the same time.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.