Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Six black ATX 24-pin dual PSU extension cables, 30 cm each

myVolts

myVolts 6× ATX 30 cm 24-pin dual PSU extension cable

SKU CH-JDRP-RZCTP

A 30 cm ATX splitter connects one motherboard to two power supplies with 24-pin connectors, rated for 2000 W

  • TypeAT
  • Connects two PSUs to one motherboard via 24-pin splitter
  • 30 cm length fits tight chassis layouts
  • Supports combined loads up to 2000 W
  • Powers on both supplies simultaneously with single signal
  • Works with 20-pin and 24-pin ATX boards

Dual PSU splitter for mining rigs

This cable splits a single motherboard 24-pin connector into two 24-pin female ends so a second power supply can be started in sync. It lets builders run multiple graphics cards or drives from one board without buying another motherboard. Each lead is 30 cm long and rated for a combined draw of 2000 W. The pack contains six identical cables for multi-GPU rigs.

Suits builders adding a second PSU to an existing

It works with both 20-pin and 24-pin ATX motherboards and any pair of standard ATX units. The synchronous start signal turns both supplies on and off together. Systems that need fully isolated rails or independent PSU control cannot use this adapter. Buyers whose cases lack physical space for two power supplies should look at something else.

Handles up to 2000 W across both supplies

The 24-pin male plug feeds the motherboard while the two female sockets accept the PSU cables. Power from the first supply should stay on the board; the second supply should only feed drives or peripheral devices. Mixing outputs between the two units is not supported. The 30 cm length gives enough reach for typical chassis layouts without excess slack.

Helstu kostir

  • Connects two PSUs to one motherboard via 24-pin splitter
  • 30 cm length fits tight chassis layouts
  • Supports combined loads up to 2000 W
  • Powers on both supplies simultaneously with single signal
  • Works with 20-pin and 24-pin ATX boards

Tæknilýsing

TypeAT

Spurningar um þessa vöru

What motherboard connector do I need for this cable to work?

The cable plugs into a standard 24-pin ATX motherboard socket and also fits 20-pin boards.

Can I use this splitter with two different power supply models?

Yes, the dual 24-pin female ends accept any two ATX power supplies.

How do I verify both power supplies start together after connecting the cable?

Press the case power button; both PSUs should spin up at the same time.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.