Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact 38mm incremental encoder with metal shell and 2m cable

myVolts

myVolts E6B2-CWZ6C 38mm incremental encoder power supply

SKU CH-90R0-MHQ2C MPN E6B2-CWZ6C

38 mm incremental encoder with DC 5–26 V supply, 2 m cable, and selectable resolution up to 5000 P/R

  • TypeAT
  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

38mm incremental encoder power supply

The myVolts E6B2-CWZ6C is a compact incremental encoder designed for motion-control systems that need precise position feedback. It suits automation engineers, robotics integrators and test-rig builders who require a rugged sensor with multiple output options.

Upgrade from basic optical encoders

This unit replaces simpler encoders that lack built-in protection or flexible voltage ranges. The jump is worth it when the application demands reverse-wiring protection, short-circuit protection and a wide DC5-26V supply range in a single 38mm diameter housing.

Sustained-load behaviour

The stainless-steel spindle and metal shell maintain signal integrity under continuous 30N radial and 20N axial loads. Internal ASIC devices provide stable complementary, push-pull or differential outputs over the full 2m cable during extended duty cycles without drift.

Privalumai

  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

Specifikacijos

TypeAT

Klausimai apie šią prekę

What mounting dimensions does the 38 mm diameter encoder need?

The encoder has a 38 mm outer diameter and a 6 mm thrust shaft diameter, so the mounting hole and coupling must match those sizes.

How is the E6B2-CWZ6C wired and which step is often missed?

Connect brown to DC 5–26 V positive, blue to 0 V negative, and black to the signal output; the step often missed is verifying the supply stays within 5–26 V before powering up.

What wear items should be planned for on this incremental encoder?

The stainless steel spindle and internal ASIC are rated for long life, but the 2 m cable and shaft bearings are the parts most likely to need replacement after extended radial or thrust loads.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.