Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact 38mm incremental encoder with metal shell and 2m cable

myVolts

myVolts E6B2-CWZ6C 38mm incremental encoder power supply

SKU CH-90R0-MHQ2C MPN E6B2-CWZ6C

38 mm incremental encoder with DC 5–26 V supply, 2 m cable, and selectable resolution up to 5000 P/R

  • TypeAT
  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

38mm incremental encoder power supply

The myVolts E6B2-CWZ6C is a compact incremental encoder designed for motion-control systems that need precise position feedback. It suits automation engineers, robotics integrators and test-rig builders who require a rugged sensor with multiple output options.

Upgrade from basic optical encoders

This unit replaces simpler encoders that lack built-in protection or flexible voltage ranges. The jump is worth it when the application demands reverse-wiring protection, short-circuit protection and a wide DC5-26V supply range in a single 38mm diameter housing.

Sustained-load behaviour

The stainless-steel spindle and metal shell maintain signal integrity under continuous 30N radial and 20N axial loads. Internal ASIC devices provide stable complementary, push-pull or differential outputs over the full 2m cable during extended duty cycles without drift.

Priekšrocības

  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

Specifikācijas

TypeAT

Jautājumi par šo preci

What mounting dimensions does the 38 mm diameter encoder need?

The encoder has a 38 mm outer diameter and a 6 mm thrust shaft diameter, so the mounting hole and coupling must match those sizes.

How is the E6B2-CWZ6C wired and which step is often missed?

Connect brown to DC 5–26 V positive, blue to 0 V negative, and black to the signal output; the step often missed is verifying the supply stays within 5–26 V before powering up.

What wear items should be planned for on this incremental encoder?

The stainless steel spindle and internal ASIC are rated for long life, but the 2 m cable and shaft bearings are the parts most likely to need replacement after extended radial or thrust loads.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.