Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact 38mm incremental encoder with metal shell and 2m cable

myVolts

myVolts E6B2-CWZ6C 38mm incremental encoder power supply

SKU CH-90R0-MHQ2C MPN E6B2-CWZ6C

38 mm incremental encoder with DC 5–26 V supply, 2 m cable, and selectable resolution up to 5000 P/R

  • TypeAT
  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

38mm incremental encoder power supply

The myVolts E6B2-CWZ6C is a compact incremental encoder designed for motion-control systems that need precise position feedback. It suits automation engineers, robotics integrators and test-rig builders who require a rugged sensor with multiple output options.

Upgrade from basic optical encoders

This unit replaces simpler encoders that lack built-in protection or flexible voltage ranges. The jump is worth it when the application demands reverse-wiring protection, short-circuit protection and a wide DC5-26V supply range in a single 38mm diameter housing.

Sustained-load behaviour

The stainless-steel spindle and metal shell maintain signal integrity under continuous 30N radial and 20N axial loads. Internal ASIC devices provide stable complementary, push-pull or differential outputs over the full 2m cable during extended duty cycles without drift.

Poudarki

  • High reliability with internal ASIC devices for long life
  • Strong anti-interference performance from built-in ASIC technology
  • Durable stainless steel spindle handles 30 N radial and 20 N thrust loads
  • Compact 38 mm diameter with 2 m cable for easy installation
  • Flexible DC 5 to 26 V supply with reverse wiring and short circuit protection

Specifikacije

TypeAT

Vprašanja o tem izdelku

What mounting dimensions does the 38 mm diameter encoder need?

The encoder has a 38 mm outer diameter and a 6 mm thrust shaft diameter, so the mounting hole and coupling must match those sizes.

How is the E6B2-CWZ6C wired and which step is often missed?

Connect brown to DC 5–26 V positive, blue to 0 V negative, and black to the signal output; the step often missed is verifying the supply stays within 5–26 V before powering up.

What wear items should be planned for on this incremental encoder?

The stainless steel spindle and internal ASIC are rated for long life, but the 2 m cable and shaft bearings are the parts most likely to need replacement after extended radial or thrust loads.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.