Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-400-12 12V 33A 400W power supply

SKU CH-8Y43-84RT5

Delivers 12 V at 33 A for industrial automation, LED displays, CCTV, 3D printers and similar loads, with short-circuit, overload and over-voltage protection

  • TypeAT
  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Industrial 12 V 400 W power supply

This myVolts unit delivers a regulated DC 12 V output at up to 33 A for 400 W total power. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar fixed-installation loads that require a steady 12 V rail.

Verify input voltage and wiring before ordering

The supply accepts AC 110 V or 220 V with a ±15 % tolerance, so confirm your mains voltage falls within that range. You must also provide a suitable enclosure and make the L, N, GND, V and ADJ connections yourself, as the unit ships as an open-frame module without a mains lead or output plug.

Protection features and voltage adjustment

Built-in short-circuit, overload and over-voltage protection shut the output down under fault conditions. The +V/ADJ terminal lets you trim the output voltage slightly, while the aluminium chassis relies on natural convection cooling within the 0–40 °C operating window.

Privalumai

  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Specifikacijos

TypeAT

Klausimai apie šią prekę

What comes in the box with the S-400-12 and what must be purchased separately?

The unit ships as a bare open-frame supply with screw terminals for L, N, GND, V and +V/ADJ. No IEC cable, mounting brackets or DIN-rail clips are included; those must be sourced separately.

The comparison table lists S-36-12, S-50-12 and S-400-12; how do I decide which model fits my load?

Match the continuous draw of your device to the output current: 3 A for 36 W loads, 4.2 A for 50 W loads, or 33 A for 400 W loads. Choose the model whose current rating exceeds your peak demand with headroom.

What does the 400 W rating mean when the supply is installed in a 3D printer or CCTV cabinet running at 40 °C?

At the maximum rated ambient temperature of 40 °C the unit can continuously deliver 12 V at 33 A (400 W) provided airflow meets the natural-convection design; higher enclosure temperatures will reduce available power.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.