Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-400-12 12V 33A 400W power supply

SKU CH-8Y43-84RT5

Delivers 12 V at 33 A for industrial automation, LED displays, CCTV, 3D printers and similar loads, with short-circuit, overload and over-voltage protection

  • TypeAT
  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Industrial 12 V 400 W power supply

This myVolts unit delivers a regulated DC 12 V output at up to 33 A for 400 W total power. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar fixed-installation loads that require a steady 12 V rail.

Verify input voltage and wiring before ordering

The supply accepts AC 110 V or 220 V with a ±15 % tolerance, so confirm your mains voltage falls within that range. You must also provide a suitable enclosure and make the L, N, GND, V and ADJ connections yourself, as the unit ships as an open-frame module without a mains lead or output plug.

Protection features and voltage adjustment

Built-in short-circuit, overload and over-voltage protection shut the output down under fault conditions. The +V/ADJ terminal lets you trim the output voltage slightly, while the aluminium chassis relies on natural convection cooling within the 0–40 °C operating window.

Pluspunten

  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Specificaties

TypeAT

Vragen over dit artikel

What comes in the box with the S-400-12 and what must be purchased separately?

The unit ships as a bare open-frame supply with screw terminals for L, N, GND, V and +V/ADJ. No IEC cable, mounting brackets or DIN-rail clips are included; those must be sourced separately.

The comparison table lists S-36-12, S-50-12 and S-400-12; how do I decide which model fits my load?

Match the continuous draw of your device to the output current: 3 A for 36 W loads, 4.2 A for 50 W loads, or 33 A for 400 W loads. Choose the model whose current rating exceeds your peak demand with headroom.

What does the 400 W rating mean when the supply is installed in a 3D printer or CCTV cabinet running at 40 °C?

At the maximum rated ambient temperature of 40 °C the unit can continuously deliver 12 V at 33 A (400 W) provided airflow meets the natural-convection design; higher enclosure temperatures will reduce available power.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.