Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-400-12 12V 33A 400W power supply

SKU CH-8Y43-84RT5

Delivers 12 V at 33 A for industrial automation, LED displays, CCTV, 3D printers and similar loads, with short-circuit, overload and over-voltage protection

  • TypeAT
  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Industrial 12 V 400 W power supply

This myVolts unit delivers a regulated DC 12 V output at up to 33 A for 400 W total power. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar fixed-installation loads that require a steady 12 V rail.

Verify input voltage and wiring before ordering

The supply accepts AC 110 V or 220 V with a ±15 % tolerance, so confirm your mains voltage falls within that range. You must also provide a suitable enclosure and make the L, N, GND, V and ADJ connections yourself, as the unit ships as an open-frame module without a mains lead or output plug.

Protection features and voltage adjustment

Built-in short-circuit, overload and over-voltage protection shut the output down under fault conditions. The +V/ADJ terminal lets you trim the output voltage slightly, while the aluminium chassis relies on natural convection cooling within the 0–40 °C operating window.

Puncte forte

  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Specificații

TypeAT

Întrebări despre acest articol

What comes in the box with the S-400-12 and what must be purchased separately?

The unit ships as a bare open-frame supply with screw terminals for L, N, GND, V and +V/ADJ. No IEC cable, mounting brackets or DIN-rail clips are included; those must be sourced separately.

The comparison table lists S-36-12, S-50-12 and S-400-12; how do I decide which model fits my load?

Match the continuous draw of your device to the output current: 3 A for 36 W loads, 4.2 A for 50 W loads, or 33 A for 400 W loads. Choose the model whose current rating exceeds your peak demand with headroom.

What does the 400 W rating mean when the supply is installed in a 3D printer or CCTV cabinet running at 40 °C?

At the maximum rated ambient temperature of 40 °C the unit can continuously deliver 12 V at 33 A (400 W) provided airflow meets the natural-convection design; higher enclosure temperatures will reduce available power.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.