Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-400-12 12V 33A 400W power supply

SKU CH-8Y43-84RT5

Delivers 12 V at 33 A for industrial automation, LED displays, CCTV, 3D printers and similar loads, with short-circuit, overload and over-voltage protection

  • TypeAT
  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Industrial 12 V 400 W power supply

This myVolts unit delivers a regulated DC 12 V output at up to 33 A for 400 W total power. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar fixed-installation loads that require a steady 12 V rail.

Verify input voltage and wiring before ordering

The supply accepts AC 110 V or 220 V with a ±15 % tolerance, so confirm your mains voltage falls within that range. You must also provide a suitable enclosure and make the L, N, GND, V and ADJ connections yourself, as the unit ships as an open-frame module without a mains lead or output plug.

Protection features and voltage adjustment

Built-in short-circuit, overload and over-voltage protection shut the output down under fault conditions. The +V/ADJ terminal lets you trim the output voltage slightly, while the aluminium chassis relies on natural convection cooling within the 0–40 °C operating window.

Istaknuto

  • High efficiency with low DC ripple for stable 12 V output
  • circuit, overload and overvoltage protection safeguards connected equipment
  • Operates from 0 °C to 40 °C with long service life
  • High insulation strength ensures safe industrial and LED use
  • 100 % full-load burn-in test confirms reliable 400 W delivery

Specifikacije

TypeAT

Pitanja o ovom artiklu

What comes in the box with the S-400-12 and what must be purchased separately?

The unit ships as a bare open-frame supply with screw terminals for L, N, GND, V and +V/ADJ. No IEC cable, mounting brackets or DIN-rail clips are included; those must be sourced separately.

The comparison table lists S-36-12, S-50-12 and S-400-12; how do I decide which model fits my load?

Match the continuous draw of your device to the output current: 3 A for 36 W loads, 4.2 A for 50 W loads, or 33 A for 400 W loads. Choose the model whose current rating exceeds your peak demand with headroom.

What does the 400 W rating mean when the supply is installed in a 3D printer or CCTV cabinet running at 40 °C?

At the maximum rated ambient temperature of 40 °C the unit can continuously deliver 12 V at 33 A (400 W) provided airflow meets the natural-convection design; higher enclosure temperatures will reduce available power.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.